From: Peter Dufault <dufa...@hda.com> The "powerpc/shared/console" code has the start-up console value fixed at 9600 baud. This changes the hard-wired constant "9600" in the code to the configuration setting "BSP_CONSOLE_BAUD" and adds configuration support in both the "waf" and the legacy configuration systems.
In addition, once the shared console baud rate can be set to start at anything other than 9600 the termios code will reset it to 9600 at the first open. Peter Dufault (2): powerpc/shared/console: Make console baud rate configurable. powerpc/shared/console: "termios" first open sets console baud to 9600 bsps/powerpc/shared/console/console.c | 4 ++-- bsps/powerpc/shared/console/uart.c | 5 ++++- c/src/lib/libbsp/powerpc/beatnik/configure.ac | 4 ++++ c/src/lib/libbsp/powerpc/haleakala/configure.ac | 4 ++++ c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac | 4 ++++ c/src/lib/libbsp/powerpc/mvme3100/configure.ac | 4 ++++ c/src/lib/libbsp/powerpc/mvme5500/configure.ac | 4 ++++ spec/build/bsps/optconsolebaud.yml | 5 +++++ spec/build/bsps/powerpc/beatnik/bspbeatnik.yml | 2 ++ spec/build/bsps/powerpc/haleakala/bsphaleakala.yml | 2 ++ spec/build/bsps/powerpc/motorola_powerpc/obj.yml | 4 +++- spec/build/bsps/powerpc/mvme3100/bspmvme3100.yml | 2 ++ spec/build/bsps/powerpc/mvme5500/bspmvme5500.yml | 2 ++ 13 files changed, 42 insertions(+), 4 deletions(-) -- 1.8.3.1 _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel