Vladimir,
I don't recall upgrading kernels.. but I'm going to boot something I
know worked, and will let you know.
PCI devices found:
Bus 0, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth 1.5 AGP (rev 0).
Master Capable. Latency=16.
Bus 0, device 16, function 0:
VGA compatible controller: ATI Technologies Inc Radeon 7500 QW (rev
0).
IRQ 48.
Master Capable. Latency=255. Min Gnt=8.
Prefetchable 32 bit memory at 0x98000000 [0x9fffffff].
I/O at 0x802400 [0x8024ff].
Non-prefetchable 32 bit memory at 0x90000000 [0x9000ffff].
Bus 16, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth 1.5 PCI (rev 0).
Master Capable. Latency=16.
Bus 16, device 20, function 0:
Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
(rev 4).
IRQ 54.
Master Capable. Latency=16. Min Gnt=10.Max Lat=48.
I/O at 0x400 [0x47f].
Non-prefetchable 32 bit memory at 0x80080000 [0x8008007f].
Bus 16, device 23, function 0:
Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 3).
Master Capable. Latency=16.
Non-prefetchable 32 bit memory at 0x80000000 [0x8007ffff].
Bus 16, device 24, function 0:
USB Controller: Apple Computer Inc. KeyLargo USB (rev 0).
IRQ 27.
Master Capable. Latency=16. Min Gnt=3.Max Lat=86.
Non-prefetchable 32 bit memory at 0x80082000 [0x80082fff].
Bus 16, device 25, function 0:
USB Controller: Apple Computer Inc. KeyLargo USB (#2) (rev 0).
IRQ 28.
Master Capable. Latency=16. Min Gnt=3.Max Lat=86.
Non-prefetchable 32 bit memory at 0x80081000 [0x80081fff].
Bus 32, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth 1.5 Internal PCI (rev 0).
Master Capable. Latency=16.
Bus 32, device 14, function 0:
Class ffff: Lucent Microelectronics FW323 (rev 255).
IRQ 40.
Master Capable. Latency=255. Min Gnt=255.Max Lat=255.
Non-prefetchable 32 bit memory at 0xf5000000 [0xf5000fff].
Bus 32, device 15, function 0:
Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM)
(rev 1).
IRQ 41.
Master Capable. Latency=6. Min Gnt=64.Max Lat=64.
Non-prefetchable 32 bit memory at 0xf5200000 [0xf53fffff].
On Wed, 2003-02-12 at 23:40, Vladimir Dergachev wrote:
> On Thu, 12 Feb 2003, Dan Burcaw wrote:
>
> > no other cards...
> >
> > I've attached iomem and dmesg.
> >
>
> Well, this is just a guess, but dmesg shows that register iomem resource
> was, for some reason, printed later than two memory mapped resources.
>
> I do not know whether this should be so, but it could be that XFree86
> got confused and thinks this is the register aperture. Can I also see
> /proc/pci ?
>
> Did you change kernel versions in between ?
>
> best
>
> Vladimir Dergachev
>
> > -Dan
> >
> >
> > On Wed, 2003-02-12 at 23:11, Vladimir Dergachev wrote:
> > > What does Linux report in /proc/iomem and dmesg ?
> > > Do you have any other video cards in the system ?
> > >
> > > This sounds like PCI resource allocation issue.
> > >
> > > best
> > >
> > > Vladimir Dergachev
> >
_______________________________________________
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
