I have an IBM 300PL w/ an onboard Trio 3D Chip, the model does not appear to be supported (?)
When X loads, it won't allow resolution beyond 640x480, it drops back to
640x480 regardless of how I configure.
The chip information is as follows (from the chip):
The model is a 86C366 looking at XFree86-HEAD from today from s3v_driver.c
in xc/programs/Xserver/hw/xfree86/drivers/s3virge there is no mention of
this chip model. Is this supported yet? It is extremely broken, ie, blit
corruption, invalid resolutions, lots of chip reset errors:
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x0e115f80
Trio3D -- S3VNopAllCmdSets: state DIDN'T changed after 1000
iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x0d915f80
S3VGEReset called from s3v_accel.c line 410
Trio3D -- GE was on ST#1: 0x0d915f80 ST#2: 0x0d915f80
restarting S3 graphics engine reset 1 ...d115f80
Trio3D -- GE was on ST#1: 0x0d115f80 ST#2: 0x0d115f80
restarting S3 graphics engine reset 2 ...c915f80
Trio3D -- GE was on ST#1: 0x0c915f80 ST#2: 0x0c915f80
restarting S3 graphics engine reset 3 ...c115f80
Trio3D -- GE was on ST#1: 0x0c115f80 ST#2: 0x0c115f80
The full information on the chip is as follows:
NDC0BB
86C366
9933 CA925.00
S3 Trio3D
On Board (tm)
Anyone else has this chip?
Included is the XFree86.0.log from /var/log.
XFree86.0.log
Description: Binary data
