Hi Brian, No the publishers are not shut down, they are still publishing. The setup is like this.
- The publisher is running on system1, which keeps publishing messages continuously. - The subscriber is running on system2 (on same LAN network) . Now I am getting the messages at the subscriber end, I receive up to 50 messages, and if i disconnect the network cable and re-connect it after a while, I am getting 75th message onwards at the subscriber. The 51st - 74th messages are lost :( On Mon, Sep 12, 2011 at 5:24 PM, Wilkins, Brian <bwilk...@harris.com> wrote: > Are the publishers still publishing / not shut down? **** > > ** ** > > Brian**** > > ** ** > > ** ** > > *From:* developer-boun...@opensplice.org [mailto: > developer-boun...@opensplice.org] *On Behalf Of *Rakesh pawar > *Sent:* Friday, September 09, 2011 3:11 AM > *To:* OpenSplice DDS Developer Mailing List > *Subject:* Re: [OSPL-Dev] Recovering lost samples at the subscriber side** > ** > > ** ** > > Hi Brian,**** > > ** ** > > I have set History.KeepAll, Durability.Transient and > Reliability.Reliable. This setup works perfectly if I am > terminating the subscriber explicitly. **** > > But while running this setup on a network, if the network is disconnected > the subscriber is still losing the samples published during the down time. > Do i need to add/modify any QOS for making this work on a network ?**** > > ** ** > > ** ** > > On Thu, Sep 8, 2011 at 5:41 PM, Wilkins, Brian <bwilk...@harris.com> > wrote:**** > > You need to set the History.KeepAll and Reliability.Reliable to keep all > the samples. Keep in mind you need to ensure you have enough resources.*** > * > > **** > > Brian**** > > **** > > **** > > *From:* developer-boun...@opensplice.org [mailto: > developer-boun...@opensplice.org] *On Behalf Of *Rakesh pawar > *Sent:* Thursday, September 08, 2011 8:05 AM > *To:* developer > *Subject:* [OSPL-Dev] Recovering lost samples at the subscriber side**** > > **** > > Hello,**** > > **** > > In the Chatter example, if I run the Chatter(Pub) and MessageBoard (Sub), I > terminate the message board and again reconnect after a while, I am > receiving the current samples being published. How can I receive the samples > published during the time when the MessageBoard was terminated. Do I need to > set the History and Reliability Qos for this purpose? I have added > <reconnect="true"> in the ospl.xml. Is there any other QOS i need to set to > receive the lost samples ? > **** > > **** > > > > **** > > **** > > -- **** > > > Cheers ! > Rakesh Pawar**** > > **** > > > _______________________________________________ > OpenSplice DDS Developer Mailing List > Developer@opensplice.org > Subscribe / Unsubscribe > http://dev.opensplice.org/mailman/listinfo/developer**** > > > > **** > > ** ** > > -- **** > > > Cheers ! > Rakesh Pawar**** > > ** ** > > _______________________________________________ > OpenSplice DDS Developer Mailing List > Developer@opensplice.org > Subscribe / Unsubscribe > http://dev.opensplice.org/mailman/listinfo/developer > > -- Cheers ! Rakesh Pawar
_______________________________________________ OpenSplice DDS Developer Mailing List Developer@opensplice.org Subscribe / Unsubscribe http://dev.opensplice.org/mailman/listinfo/developer
