Hi,
i have a funy problem with the report design in Ax. 2.5 /Sp2
I set in a report section 3 values in 3 different lines
(Value 1: Top = 0 Char, Value 2: Top =1 Char, Value 3: Top = 3 char)
The preview / grafical design shows me everything fine.. but when
printing (running the report) the vaules are placed on completely
different lines / prositions..
Any suggestions?
Pirmin
PS: also did postion by cm/mm instead of char > same result !
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
