Thanks. I already had installed that usb_modeswitch precompiled por openwrt and it works, even though I have to execute it manually in order for it to change the state of the dong
The thing is that after successfully changing the state of the 3g dongle, it is not recognized by the fonera. On Sat, Dec 19, 2009 at 2:20 AM, Timo Lindhorst <[email protected]>wrote: > Hey Juan Manuel, > > > Has anybody had any experience with usb_modeswitch ( > > http://www.draisberghof.de/usb_modeswitch/) and the f2g or f2n? > Yes, I have. In short: it works. > > I received my f2n some days ago and plugged in my 3g USB dongle (icon 210). > As > expected, it does not work out of the box. I fetched the SVN repo from > fonosfera.org and build an image including usb-modeswitch as openwrt feed > (version 1.0.5). The package does not include any config file, thus I > copied it to the > rootfs separately -- at least the relevant part of it. > > As I have said the usb modeswitch does work. However, I have to expend some > more effort to get the 3g working. The usbserial module has to be reloaded > with special parameters. However, as this was not part of your question, I > won't > get into detail. > > I've just tested the pre-built package from openwrt [1] (usb_modeswitch > version 0.9.5), that one also works. Thus, if you want to play with it, it > should be sufficient to flash a DEV firmware and setup the openwrt repo > like > described in [2] -- well, at least for the f2n. > > Regards, > Timo > > > [1] > http://downloads.openwrt.org/kamikaze/8.09.1/rb532/packages/usb-modeswitch_0.9.5-1_mipsel.ipk > > [2] http://wiki.fon.com/wiki/Fonera_Development#Repositories >
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
