Hello, we as basysKom have developed a Qt API for OPC UA which we would like to contribute to the Qt project.
OPC UA is a communication protocol developed for industrial machine to machine communication. The vision of OPC UA is to have one uniform, vendor-independent communication protocol for all industrial communication (from machine controllers up to enterprise level systems). Our API is a Qt wrapper for existing OPC UA stacks. We have a plugin mechanism in place so different OPC UA stacks can be used through a common interface. We have currently implemented an HMI focused sub-set of the client-side. Our initial contribution would include a plugin for the open source FreeOPCUA stack. We also have implementations for two more (commercial) OPC UA stacks available which we might contribute at a later point (depending on licence issues). We have reviewed the list of existing modules and did not find a module with related functionality. Therefore we would like to request a new module. Our preferred repo would be "qt/qtopcua". Kind Regards, Frank -- Frank Meerkötter Development Lead basysKom GmbH Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany Tel : +49 6151 870 589 161 | Fax: +49 6151 - 870 589 162 [email protected] | www.basyskom.com Handelsregister: Darmstadt HRB 9352 Geschäftsführung: Eva Brucherseifer, Heike Ziegler _______________________________________________ Development mailing list [email protected] http://lists.qt-project.org/mailman/listinfo/development
