Hi, IMHO, all industrial protocols can be added to qtserialbus: http://code.qt.io/cgit/qt/qtserialbus.git/ There already are present the Modbus and the CAN protocols.
BR, Denis 2015-09-17 16:54 GMT+03:00 Frank Meerkötter <[email protected]> : > Hello, > > we as basysKom have developed a Qt API for OPC UA which we would like > to contribute to the Qt project. > > OPC UA is a communication protocol developed for industrial > machine to machine communication. The vision of OPC UA is to have > one uniform, vendor-independent communication protocol for all > industrial communication (from machine controllers up to enterprise > level systems). > > Our API is a Qt wrapper for existing OPC UA stacks. We have a plugin > mechanism in place so different OPC UA stacks can be used through a > common interface. We have currently implemented an HMI focused sub-set > of the client-side. > > Our initial contribution would include a plugin for the open source > FreeOPCUA stack. We also have implementations for two more (commercial) > OPC UA stacks available which we might contribute at a later point > (depending on licence issues). > > We have reviewed the list of existing modules and did not find a > module with related functionality. Therefore we would like to request > a new module. Our preferred repo would be "qt/qtopcua". > > Kind Regards, > Frank > > -- > Frank Meerkötter > Development Lead > > basysKom GmbH > Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany > Tel : +49 6151 870 589 161 | Fax: +49 6151 - 870 589 162 > [email protected] | www.basyskom.com > > Handelsregister: Darmstadt HRB 9352 > Geschäftsführung: Eva Brucherseifer, Heike Ziegler > > _______________________________________________ > Development mailing list > [email protected] > http://lists.qt-project.org/mailman/listinfo/development >
_______________________________________________ Development mailing list [email protected] http://lists.qt-project.org/mailman/listinfo/development
