Thanks for the reply! All the ping tests work (see below) both on the Neo and the Laptop.
Only ipkg update gives me wget: Unable to connect to remote host (88.198.84.234): No route to host An error ocurred, return value: 6. Collected errors: ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-GRI9wX http://buildhost.openmoko.org/snapshots/2007.08/ipk/all/Packages.gz' > You mentioned in a previous message that you could reach any IP address > from the Neo. Can you confirm this is still true? > > ping 88.198.84.234 > ping 72.14.207.99 $ ping 88.198.84.234 PING 88.198.84.234 (88.198.84.234): 56 data bytes 64 bytes from 88.198.84.234: icmp_seq=0 ttl=49 time=28.7 ms ... 4 packets transmitted, 4 packets received, 0% packet loss $ ping 72.14.207.99 PING 72.14.207.99 (72.14.207.99): 56 data bytes 64 bytes from 72.14.207.99: icmp_seq=0 ttl=233 time=132.9 ms 64 bytes from 72.14.207.99: icmp_seq=1 ttl=233 time=133.5 ms 64 bytes from 72.14.207.99: icmp_seq=2 ttl=233 time=136.4 ms still works... > > I suspect not. I'll bet your routing got messed up somehow. Send us the > results of this: > > netstat -rn Neo [EMAIL PROTECTED]:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0 0.0.0.0 192.168.0.200 0.0.0.0 UG 0 0 0 usb0 Laptop [EMAIL PROTECTED] flyingfischer]# netstat -rn Kernel IP Routentabelle Ziel Router Genmask Flags MSS Fenster irtt Iface 192.168.0.202 0.0.0.0 255.255.255.255 UH 0 0 0 usb0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0 192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.10.1 0.0.0.0 UG 0 0 0 eth1 > > You might also confirm that you can ping the build host from your > laptop, just for completeness. I can ping the buildhost from both, the Neo and the Laptop Neo [EMAIL PROTECTED]:~$ ping buildhost.openmoko.org PING buildhost.openmoko.org (88.198.84.234): 56 data bytes 64 bytes from 88.198.84.234: icmp_seq=0 ttl=49 time=26.8 ms 64 bytes from 88.198.84.234: icmp_seq=1 ttl=49 time=28.3 ms Laptop # ping buildhost.openmoko.org PING buildhost.openmoko.org (88.198.84.234) 56(84) bytes of data. 64 bytes from buildhost.openmoko.org (88.198.84.234): icmp_seq=1 ttl=50 time=25.3 ms 64 bytes from buildhost.openmoko.org (88.198.84.234): icmp_seq=2 ttl=50 time=28.2 ms Thanks for ideas! > Thanks, > Michael
