On Mon, Jan 24, 2011 at 09:59:01AM +0530, Sebastian Andrzej Siewior wrote:
> This allows to load the OF driver based informations from the device
> tree. Systems without BIOS may need to perform some initialization.
> PowerPC creates a PNP device from the OF information and performs this
> kind of initialization in their private PCI quirk. This looks more
> generic.
>
> Cc: [email protected]
> Cc: Alessandro Zummo <[email protected]>
> Cc: [email protected]
> Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
> Signed-off-by: Dirk Brandewie <[email protected]>
> ---
> Documentation/powerpc/dts-bindings/rtc-cmos.txt | 28 ++++++++++++++
> drivers/rtc/rtc-cmos.c | 46
> +++++++++++++++++++++++
> 2 files changed, 74 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt
>
> diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt
> b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
> new file mode 100644
> index 0000000..7382989
> --- /dev/null
> +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
Move to Documentation/devicetree/bindings/rtc/
> @@ -0,0 +1,28 @@
> + Motorola mc146818 compatible RTC
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Required properties:
> + - compatible : "motorola,mc146818"
> + - reg : should contain registers location and length.
> +
> +Optional properties:
> + - interrupts : should contain interrupt.
> + - interrupt-parent : interrupt source phandle.
> + - ctrl-reg : Contains the initial value of the control register also
> + called "Register B".
> + - freq-reg : Contains the initial value of the frequency register also
> + called "Regsiter A".
> +
> +"Register A" and "B" are usually initialized by the firmware (BIOS for
> +instance). If this is not done, it can be performed by the driver.
> +
> +ISA Example:
> +
> + rtc@70 {
> + compatible = "motorola,mc146818";
> + interrupts = <8 3>;
> + interrupt-parent = <&ioapic1>;
> + ctrl-reg = <2>;
> + freq-reg = <0x26>;
> + reg = <1 0x70 2>;
> + };
> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
> index c7ff8df..2709e00 100644
> --- a/drivers/rtc/rtc-cmos.c
> +++ b/drivers/rtc/rtc-cmos.c
> @@ -37,6 +37,8 @@
> #include <linux/mod_devicetable.h>
> #include <linux/log2.h>
> #include <linux/pm.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
>
> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
> #include <asm-generic/rtc.h>
> @@ -1123,6 +1125,46 @@ static struct pnp_driver cmos_pnp_driver = {
>
> #endif /* CONFIG_PNP */
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id of_cmos_match[] = {
> + {
> + .compatible = "motorola,mc146818",
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, of_cmos_match);
> +
> +static __init void cmos_of_init(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct rtc_time time;
> + int ret;
> + const __be32 *val;
> +
> + if (!node)
> + return;
> +
> + val = of_get_property(node, "ctrl-reg", NULL);
> + if (val)
> + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
> +
> + val = of_get_property(node, "freq-reg", NULL);
> + if (val)
> + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
> +
> + get_rtc_time(&time);
> + ret = rtc_valid_tm(&time);
> + if (ret) {
> + struct rtc_time def_time = {
> + .tm_year = 1,
> + .tm_mday = 1,
> + };
> + set_rtc_time(&def_time);
> + }
> +}
> +#else
> +static inline void cmos_of_init(struct platform_device *pdev) {}
> +#endif
> /*----------------------------------------------------------------*/
>
> /* Platform setup should have set up an RTC device, when PNP is
> @@ -1131,6 +1173,7 @@ static struct pnp_driver cmos_pnp_driver = {
>
> static int __init cmos_platform_probe(struct platform_device *pdev)
> {
> + cmos_of_init(pdev);
> cmos_wake_setup(&pdev->dev);
> return cmos_do_probe(&pdev->dev,
> platform_get_resource(pdev, IORESOURCE_IO, 0),
> @@ -1162,6 +1205,9 @@ static struct platform_driver cmos_platform_driver = {
> #ifdef CONFIG_PM
> .pm = &cmos_pm_ops,
> #endif
> +#if defined(CONFIG_OF)
> + .of_match_table = of_cmos_match,
> +#endif
The #if defined(CONFIG_OF) is no longer necessary around
.of_match_table, particularly if you have a #else above that #defines
of_cmos_match to NULL.
> }
> };
>
> --
> 1.7.3.2
>
> _______________________________________________
> devicetree-discuss mailing list
> [email protected]
> https://lists.ozlabs.org/listinfo/devicetree-discuss
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
