On Sun, Jul 10, 2011 at 01:16:35AM +0800, Shawn Guo wrote:
> spi_imx_devtype_data has already been driver private data.  There is
> really no need to make a copy in spi_imx_data.  Instead, a reference
> pointer works perfectly fine.
> 
> Signed-off-by: Shawn Guo <[email protected]>
> Cc: Uwe Kleine-König <[email protected]>
> Cc: Sascha Hauer <[email protected]>
> Cc: Grant Likely <[email protected]>

Applied, thanks.

g.

> ---
>  drivers/spi/spi-imx.c |   24 ++++++++++++------------
>  1 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 69d6dba..1c55dc9 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -96,7 +96,7 @@ struct spi_imx_data {
>       const void *tx_buf;
>       unsigned int txfifo; /* number of words pushed in tx FIFO */
>  
> -     struct spi_imx_devtype_data devtype_data;
> +     struct spi_imx_devtype_data *devtype_data;
>  };
>  
>  #define MXC_SPI_BUF_RX(type)                                         \
> @@ -539,7 +539,7 @@ static void __maybe_unused mx1_reset(struct spi_imx_data 
> *spi_imx)
>   * These version numbers are taken from the Freescale driver.  Unfortunately 
> it
>   * doesn't support i.MX1, so this entry doesn't match the scheme. :-(
>   */
> -static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
> +static struct spi_imx_devtype_data spi_imx_devtype_data[] = {
>  #ifdef CONFIG_SPI_IMX_VER_IMX1
>       [SPI_IMX_VER_IMX1] = {
>               .intctrl = mx1_intctrl,
> @@ -607,21 +607,21 @@ static void spi_imx_chipselect(struct spi_device *spi, 
> int is_active)
>  
>  static void spi_imx_push(struct spi_imx_data *spi_imx)
>  {
> -     while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
> +     while (spi_imx->txfifo < spi_imx->devtype_data->fifosize) {
>               if (!spi_imx->count)
>                       break;
>               spi_imx->tx(spi_imx);
>               spi_imx->txfifo++;
>       }
>  
> -     spi_imx->devtype_data.trigger(spi_imx);
> +     spi_imx->devtype_data->trigger(spi_imx);
>  }
>  
>  static irqreturn_t spi_imx_isr(int irq, void *dev_id)
>  {
>       struct spi_imx_data *spi_imx = dev_id;
>  
> -     while (spi_imx->devtype_data.rx_available(spi_imx)) {
> +     while (spi_imx->devtype_data->rx_available(spi_imx)) {
>               spi_imx->rx(spi_imx);
>               spi_imx->txfifo--;
>       }
> @@ -635,12 +635,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
>               /* No data left to push, but still waiting for rx data,
>                * enable receive data available interrupt.
>                */
> -             spi_imx->devtype_data.intctrl(
> +             spi_imx->devtype_data->intctrl(
>                               spi_imx, MXC_INT_RR);
>               return IRQ_HANDLED;
>       }
>  
> -     spi_imx->devtype_data.intctrl(spi_imx, 0);
> +     spi_imx->devtype_data->intctrl(spi_imx, 0);
>       complete(&spi_imx->xfer_done);
>  
>       return IRQ_HANDLED;
> @@ -677,7 +677,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
>       } else
>               BUG();
>  
> -     spi_imx->devtype_data.config(spi_imx, &config);
> +     spi_imx->devtype_data->config(spi_imx, &config);
>  
>       return 0;
>  }
> @@ -696,7 +696,7 @@ static int spi_imx_transfer(struct spi_device *spi,
>  
>       spi_imx_push(spi_imx);
>  
> -     spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE);
> +     spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
>  
>       wait_for_completion(&spi_imx->xfer_done);
>  
> @@ -811,7 +811,7 @@ static int __devinit spi_imx_probe(struct platform_device 
> *pdev)
>       init_completion(&spi_imx->xfer_done);
>  
>       spi_imx->devtype_data =
> -             spi_imx_devtype_data[pdev->id_entry->driver_data];
> +             &spi_imx_devtype_data[pdev->id_entry->driver_data];
>  
>       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>       if (!res) {
> @@ -854,9 +854,9 @@ static int __devinit spi_imx_probe(struct platform_device 
> *pdev)
>       clk_enable(spi_imx->clk);
>       spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
>  
> -     spi_imx->devtype_data.reset(spi_imx);
> +     spi_imx->devtype_data->reset(spi_imx);
>  
> -     spi_imx->devtype_data.intctrl(spi_imx, 0);
> +     spi_imx->devtype_data->intctrl(spi_imx, 0);
>  
>       ret = spi_bitbang_start(&spi_imx->bitbang);
>       if (ret) {
> -- 
> 1.7.4.1
> 
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to