Adding the binding for the TI bq20z75 fuel gadge and the
bq20z75 driver.
Signed-off-by: Rhyland Klein <[email protected]>
---
v2: Fixed typo in binding description
v3: Changed unique properties to be use "ti,"
Changed to use single gpio entry for gpio info
.../bindings/power_supply/ti_bq20z75.txt | 23 ++++++++++++++++++++
1 files changed, 23 insertions(+), 0 deletions(-)
create mode 100644
Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
new file mode 100644
index 0000000..7571294
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
@@ -0,0 +1,23 @@
+TI bq20z75
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq20z75"
+
+Optional properties :
+ - ti,i2c-retry-count : The number of times to retry i2c transactions on i2c
+ IO failure.
+ - ti,poll-retry-count : The number of times to try looking for new status
+ after an external change notification.
+ - ti,battery-detect-gpios : The gpio which signals battery detection and
+ a flag specifying its polarity.
+
+Example:
+
+ bq20z75@b {
+ compatible = "ti,bq20z75";
+ reg = < 0xb >;
+ ti,i2c-retry-count = <2>;
+ ti,poll-retry-count = <10>;
+ ti,battery-detect-gpios = <&gpio-controller 122 1>;
+ }
--
1.7.6
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
