On Tue, Sep 13, 2011 at 02:21:39PM -0700, Rhyland Klein wrote: > Adding the binding for the TI bq20z75 fuel gadge and the > bq20z75 driver.
Squash this patch into the first patch. There is no reason to keep them separate. > > Signed-off-by: Rhyland Klein <[email protected]> > --- > v2: Fixed typo in binding description > v3: Changed unique properties to be use "ti," > Changed to use single gpio entry for gpio info > > .../bindings/power_supply/ti_bq20z75.txt | 23 > ++++++++++++++++++++ > 1 files changed, 23 insertions(+), 0 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt > > diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt > b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt > new file mode 100644 > index 0000000..7571294 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt > @@ -0,0 +1,23 @@ > +TI bq20z75 > +~~~~~~~~~~ > + > +Required properties : > + - compatible : "ti,bq20z75" > + > +Optional properties : > + - ti,i2c-retry-count : The number of times to retry i2c transactions on i2c > + IO failure. > + - ti,poll-retry-count : The number of times to try looking for new status > + after an external change notification. > + - ti,battery-detect-gpios : The gpio which signals battery detection and > + a flag specifying its polarity. > + > +Example: > + > + bq20z75@b { > + compatible = "ti,bq20z75"; > + reg = < 0xb >; > + ti,i2c-retry-count = <2>; > + ti,poll-retry-count = <10>; > + ti,battery-detect-gpios = <&gpio-controller 122 1>; > + } > -- > 1.7.6 > > > _______________________________________________ > linux-arm-kernel mailing list > [email protected] > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
