Many interrupt sinks support various of active high/low, rising/falling edge. This can already be configured by setting #interrupt-cells appropriately, and defining an interrupt-controller-specific binding for the additional cells.
At least some interrupt sources have similar configurability in HW. An example is the WM8903 audio codec, which can generate both active high and active low interrupt signals. One possibility is to describe this directly in the binding for each interrupt source. I originally proposed the following for the WM8903: * Interrupt output is active high by default. * Presence of an "irq-active-low" property selects an active low output instead. Mark Brown pointed out that we probably want to standardize the binding, so that every interrupt source doesn't do something different. Perhaps one of: irq-active-low; irq-active-high; irq-edge-falling; irq-edge-rising; or: interrupts-config = <"active-low"> // or "active-high", etc. (perhaps with indices in that list matching the interrupts property) ... and a helper function in the kernel to parse those However, given that interrupt sinks already know which signaling methods they support, and may be configured to accept a specific method per interrupt input using extra interrupt cells, perhaps the solution isn't to create a binding that the interrupt sink parses in isolation, but rather to create a new API within the kernel where the interrupt source can query the interrupt sink for a list of supported signaling methods, and pick one that it also supports, and use it. This list could be restricted based on the interrupts property's extra cells. What are people's thoughts here; should we go down this auto-configuration route, or just explicitly configure interrupt sources using a binding other than the interrupts property? Related, having this negotiation followed by a request_irq() passing the flags back to the sink seems a little redundant, but I suppose if the sink is configurable and unconstrained, this is necessary. -- nvpublic _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
