On Thu, 2012-02-23 at 19:52 +0000, Jason Cooper wrote: > This patch series provides initial support for devicetree on kirkwood for the > dreamplug platform. After discussing the approach with Arnd Bergman last week > at ELC, we decided to take an incremental approach to the conversion. First, > I > would detect that we were on the dreamplug via the devicetree blob. Then, > configure uart0 via devicetree. We chose the uart since it is already well > supported under devicetree. > > This patch series has been boot-tested on the dreamplug.
Tested-by: Ian Campbell <[email protected]> I needed the following (obvious) patch against u-boot: diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 0f2f9a2..76f9eea 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -148,4 +148,6 @@ */ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_OF_LIBFDT + #endif /* _CONFIG_DREAMPLUG_H */ Ian. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
