On Mon, 2012-02-27 at 09:57 -0500, Jason wrote: > On Sun, Feb 26, 2012 at 11:00:38AM +0000, Ian Campbell wrote: > > On Thu, 2012-02-23 at 19:52 +0000, Jason Cooper wrote: > > > This patch series provides initial support for devicetree on kirkwood for > > > the > > > dreamplug platform. After discussing the approach with Arnd Bergman last > > > week > > > at ELC, we decided to take an incremental approach to the conversion. > > > First, I > > > would detect that we were on the dreamplug via the devicetree blob. Then, > > > configure uart0 via devicetree. We chose the uart since it is already > > > well > > > supported under devicetree. > > > > > > This patch series has been boot-tested on the dreamplug. > > > > Tested-by: Ian Campbell <[email protected]> > > thanks! > > > I needed the following (obvious) patch against u-boot: > > yes, I forgot to mention that. By any chance, have you tested booting > non-fdt kernels from u-boot with this option enabled? I'm fairly sure > it will work, but I haven't tested it myself.
I hadn't but I have now, it worked fine booting my existing kernel (which uses v3 of your previous non-FDT dreamplug patches) with the updated u-boot. > If you can boot both fdt and non-fdt kernels with this enabled, submit > it to u-boot, CC: Prafulla, and I'll ack it. Done. Thanks, Ian. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
