Use devicetree to define NAND partitions. Use D-link partition scheme by
default, to be vaguely compatible with their userland.

Changes since last submission (V4):-
* Don't add NAND support then throw it away immediately after [Grant Likely]

Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Jason Cooper <[email protected]>
Signed-off-by: Jamie Lentin <[email protected]>
---
 arch/arm/boot/dts/kirkwood-dns320.dts |   35 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/kirkwood-dns325.dts |   35 +++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts 
b/arch/arm/boot/dts/kirkwood-dns320.dts
index 78c834f..dc09a73 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -25,5 +25,40 @@
                        clock-frequency = <166666667>;
                        status = "okay";
                };
+
+               nand@3000000 {
+                       status = "okay";
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0000000 0x100000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "uImage";
+                               reg = <0x0100000 0x500000>;
+                       };
+
+                       partition@600000 {
+                               label = "ramdisk";
+                               reg = <0x0600000 0x500000>;
+                       };
+
+                       partition@b00000 {
+                               label = "image";
+                               reg = <0x0b00000 0x6600000>;
+                       };
+
+                       partition@7100000 {
+                               label = "mini firmware";
+                               reg = <0x7100000 0xa00000>;
+                       };
+
+                       partition@7b00000 {
+                               label = "config";
+                               reg = <0x7b00000 0x500000>;
+                       };
+               };
        };
 };
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts 
b/arch/arm/boot/dts/kirkwood-dns325.dts
index 23241ab..c2a5562 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -20,5 +20,40 @@
                        clock-frequency = <200000000>;
                        status = "okay";
                };
+
+               nand@3000000 {
+                       status = "okay";
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0000000 0x100000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "uImage";
+                               reg = <0x0100000 0x500000>;
+                       };
+
+                       partition@600000 {
+                               label = "ramdisk";
+                               reg = <0x0600000 0x500000>;
+                       };
+
+                       partition@b00000 {
+                               label = "image";
+                               reg = <0x0b00000 0x6600000>;
+                       };
+
+                       partition@7100000 {
+                               label = "mini firmware";
+                               reg = <0x7100000 0xa00000>;
+                       };
+
+                       partition@7b00000 {
+                               label = "config";
+                               reg = <0x7b00000 0x500000>;
+                       };
+               };
        };
 };
-- 
1.7.9.1

_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to