On Wed, Apr 18, 2012 at 03:24:45PM +0200, Andrew Lunn wrote: > > > dies at "Gating clock of unused units", presumably as CGC_RUNIT isn't set. > > > Is this something known or is it worth further investigation? > > > > That could potentially mess up a future bisect. However, it would only > > crop up for dnskw boards. I'll let Grant weigh in on this since he's > > the one who asked that the nand init be removed. > > Turning off RUNIT is bad. Both the NAND and SPI controllers use this > clock. You can only safely turn it off if none of these are active.
Jamie, If we hear no objections, call kirkwood_nand_init() with no partition entries, then put the partition entries in the commandline in the dts. This is what Arnaud Patard is doing with the Iomega iConnect: mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd)... Then, in the last patch remove the mtdparts from the commandline in the dts and add the partition entries appropriately. thx, Jason. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
