Add device tree bindings for TI's tps65910 pmic.
Signed-off-by: Rhyland Klein <[email protected]>
---
v2: Moved ext-sleep-control into regulator nodes
Documentation/devicetree/bindings/mfd/tps65910.txt | 133 ++++++++++++++++++++
1 files changed, 133 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/tps65910.txt
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt
b/Documentation/devicetree/bindings/mfd/tps65910.txt
new file mode 100644
index 0000000..645f5ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -0,0 +1,133 @@
+TPS65910 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps65910" or "ti,tps65911"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO, this should be 2.
+ The first cell is the GPIO number.
+ The second cell is used to specify additional options <unused>.
+- gpio-controller: mark the device as a GPIO controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
+ tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
+ vaux2, vaux33, vmmc
+ tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+ ldo6, ldo7, ldo8
+
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+ There should be 9 entries here, one for each gpio.
+
+Regulator Optional properties:
+- ti,regulator-ext-sleep-control: enable external sleep
+ control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps65910@d2 {
+ compatible = "ti,tps65910";
+ reg = <0xd2>;
+ interrupt-parent = <&intc>;
+ interrupts = < 0 118 0x04 >;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,vmbch-threshold = 0;
+ ti,vmbch2-threshold = 0;
+
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+ regulators {
+ vdd1_reg: vdd1 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vdd2_reg: vdd2 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <4>;
+ };
+ vddctrl_reg: vddctrl {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vio_reg: vio {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ };
+ };
--
1.7.0.4
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
