Hi Marc, On Fri, Aug 31, 2012 at 14:59:21, AnilKumar, Chimata wrote: > Modify c_can binding documentation according to recent review comments > on device tree data addition patches. > > Signed-off-by: AnilKumar Ch <[email protected]> > --- > .../devicetree/bindings/net/can/c_can.txt | 25 > ++++++++++++++++---- > 1 file changed, 20 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt > b/Documentation/devicetree/bindings/net/can/c_can.txt > index a43f083..90a70be 100644 > --- a/Documentation/devicetree/bindings/net/can/c_can.txt > +++ b/Documentation/devicetree/bindings/net/can/c_can.txt > @@ -8,6 +8,8 @@ Required properties: > registers map > - interrupts : property with a value describing the interrupt > number > +- status : describes the node status either "disabled" or > + "okay" > > Optional properties: > - interrupt-parent : The parent interrupt controller > @@ -20,18 +22,31 @@ Future plan is to migrate hwmod data base contents into > device tree > blob so that, all the required data will be used from device tree dts > file. > > -Examples: > +Example: > > - d_can@481D0000 { > +Step1: SoC common .dtsi file > + > + d_can1: d_can@481d0000 { > compatible = "bosch,d_can"; > - reg = <0x481D0000 0x1000>; > - interrupts = <55 0x4>; > + reg = <0x481d0000 0x2000>; > + interrupts = <55>; > interrupt-parent = <&intc>; > + status = "disabled"; > }; > > (or) > > - d_can@481D0000 { > + d_can1: d_can@481d0000 { > compatible = "bosch,d_can"; > ti,hwmods = "d_can1"; > + reg = <0x481d0000 0x2000>; > + interrupts = <55>; > + interrupt-parent = <&intc>; > + status = "disabled"; > + }; > + > +Step 2: board specific .dts file > + > + &dcan1 { > + status = "okay"; > }; > -- > 1.7.9.5 > >
Can you review this patch and push it to linux-can tree? Because initial version of this file c_can.txt is in linux-can tree. Thanks AnilKumar _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
