Allow users to specify the phy interface of the CPSW slaves. The new node parameter is called "phy_if_mode" and is optional. The original behaviour of the driver is preserved when not given.
Signed-off-by: Daniel Mack <[email protected]> Cc: Mugunthan V N <[email protected]> Cc: Vaibhav Hiremath <[email protected]> Cc: David S. Miller <[email protected]> --- Documentation/devicetree/bindings/net/cpsw.txt | 3 +++ drivers/net/ethernet/ti/cpsw.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index dcaabe9..d87f7d2 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -25,6 +25,8 @@ Required properties: - slave_reg_ofs : Specifies slave register offset - sliver_reg_ofs : Specifies slave sliver register offset - phy_id : Specifies slave phy id +- phy_if_mode : Specified slave phy interface mode (optional) + (one of the PHY_INTERFACE_MODE_* as numerical value) - mac-address : Specifies slave MAC address Optional properties: @@ -62,6 +64,7 @@ Examples: slave_reg_ofs = <0x208>; sliver_reg_ofs = <0xd80>; phy_id = "davinci_mdio.16:00"; + phy_if_mode = <6>; /* PHY_INTERFACE_MODE_RGMII */ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index aa78168..3d7594e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -850,6 +850,9 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } slave_data->sliver_reg_ofs = prop; + if (!of_property_read_u32(slave_node, "phy_if_mode", &prop)) + slave_data->phy_if = prop; + mac_addr = of_get_mac_address(slave_node); if (mac_addr) memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN); -- 1.7.11.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
