On 11/19/2012 11:51 AM, Catalin Marinas wrote: > Hi Gregory, > > On 14 November 2012 22:20, Gregory CLEMENT > <[email protected]> wrote: >> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig >> index 94186b6..3fd629d 100644 >> --- a/arch/arm/mm/Kconfig >> +++ b/arch/arm/mm/Kconfig >> @@ -352,6 +352,10 @@ config CPU_PJ4 >> select ARM_THUMBEE >> select CPU_V7 >> >> +config CPU_PJ4B >> + bool >> + select CPU_V7 > > With ARMv6 we started just using the generic architecture name for > different processors (i.e. CPU_V6, CPU_V7). Is PJ4B another ARMv7 > implementation (like Cortex-A9)?
Yes it is. > >> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S >> index 846d279..a4c0ccf 100644 >> --- a/arch/arm/mm/proc-v7.S >> +++ b/arch/arm/mm/proc-v7.S >> @@ -169,6 +169,47 @@ __v7_ca15mp_setup: >> orreq r0, r0, r10 @ Enable CPU-specific SMP >> bits >> mcreq p15, 0, r0, c1, c0, 1 >> #endif >> + >> +__v7_pj4b_setup: >> +#ifdef CONFIG_CPU_PJ4B >> + >> +#define SNOOP_DATA (1 << 25) /* Dont interleave write and snoop data */ >> +#define CWF (1 << 27) /* Disable Critical Word First feature */ >> +#define OUTSANDING_NC (1 << 29) /* Disable outstanding non cacheable >> request */ >> +#define L1_REP_RR (1 << 30) /* L1 replacement - Strict round robin */ >> + >> +#define AUX_DBG_CTRL2 (SNOOP_DATA | CWF | OUTSANDING_NC | L1_REP_RR) >> + >> + /* Auxiliary Debug Modes Control 1 Register */ >> + mrc p15, 1, r0, c15, c1, 1 >> + orr r0, r0, #(1 << 16) @ Disable data transfer for clean >> line. >> + orr r0, r0, #(1 << 5) @ Enable the back off of STREX instr >> + orr r0, r0, #(1 << 8) @ Disable Internal Parity Handling >> + bic r0, r0, #(1 << 2) @ Disable Static BP >> + mcr p15, 1, r0, c15, c1, 1 >> + >> + /* Auxiliary Debug Modes Control 2 Register */ >> + mrc p15, 1, r0, c15, c1, 2 >> + bic r0, r0, #(1 << 23) @ Enable fast LDR. >> + orr r0, r0, #AUX_DBG_CTRL2 >> + mcr p15, 1, r0, c15, c1, 2 >> + >> + /* Auxiliary Functional Modes Control Register 0 */ >> + mrc p15, 1, r0, c15, c2, 0 >> +#ifdef CONFIG_SMP >> + orr r0, r0, #(1 << 1) @ Set SMP mode. Join the coherency >> fabric >> +#endif >> + orr r0, r0, #(1 << 2) @ Support L1 parity checking >> + orr r0, r0, #(1 << 8) @ Broadcast Cache and TLB maintenance >> + mcr p15, 1, r0, c15, c2, 0 >> + >> + /* Auxiliary Debug Modes Control 0 Register */ >> + mrc p15, 1, r0, c15, c1, 0 >> + orr r0, r0, #(1 << 22) @ WFI/WFE - serve the DVM and back to >> idle >> + mcr p15, 1, r0, c15, c1, 0 > > Any chance that these could be set by the firmware prior to starting > the kernel? We don't have any guidance for Linux here but longer term > it seems to cause problems (i.e. you add some secure layer in a new > CPU version). > I will ask to Marvell engineers. However I hope it won't be show stopper for merging this code in 3.8. This patch set was released 7 weeks ago, so would have though there was a lot of time to raise the issue related to this code. That's said, if the change to be done are small enough it could be done as a fix for the 3.8 release candidate. Thanks, Gregory _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
