On Sat, Jan 5, 2013 at 1:02 PM, Laxman Dewangan <[email protected]> wrote:
> From: Pritesh Raithatha <[email protected]> > > NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e. > rcv-sel and drive type. > > rcv-sel: Select between High and Normal VIL/VIH receivers. > RCVR_SEL=1: High VIL/VIH > RCVR_SEL=0: Normal VIL/VIH > > drv_type: Ouptput drive type: > 33-50 ohm driver: 0x1 > 66-100ohm driver: 0x0 > > Add support of these parameters to be configure from DTS file. > > Tegra20 and Tegra30 does not support this configuration and hence initialize > their > pinmux structure with reg = -1. > > Originally written by Pritesh Raithatha. > Changes by ldewangan: > - remove drvtype_width as it is always 2. > - Better describe the change. > > Signed-off-by: Pritesh Raithatha <[email protected]> > Signed-off-by: Laxman Dewangan <[email protected]> Stephen, can you look at this patch? Authors: you need Stephen's ACK on this. Yours, Linus Walleij _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
