On Mon, Mar 4, 2013 at 8:23 PM, Jon Hunter <[email protected]> wrote: > > On 03/04/2013 12:35 PM, Javier Martinez Canillas wrote: >> The binding documentation for the OMAP GPIO controller has the description >> for the "#interrupt-cells" property after the "interrupt-controller" >> definition. This is confusing so is better to move "interrupt-controller" >> after the "#interrupt-cells" description. >> >> Reported-by: Stephen Warren <[email protected]> >> Signed-off-by: Javier Martinez Canillas <[email protected]> >> --- >> .../devicetree/bindings/gpio/gpio-omap.txt | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt >> b/Documentation/devicetree/bindings/gpio/gpio-omap.txt >> index bff51a2..8b9914c 100644 >> --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt >> +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt >> @@ -10,7 +10,6 @@ Required properties: >> - second cell is used to specify optional parameters (unused) >> - gpio-controller : Marks the device node as a GPIO controller. >> - #interrupt-cells : Should be 2. >> -- interrupt-controller: Mark the device node as an interrupt controller >> The first cell is the GPIO number. >> The second cell is used to specify flags: >> bits[3:0] trigger type and level flags: >> @@ -18,6 +17,7 @@ Required properties: >> 2 = high-to-low edge triggered. >> 4 = active high level-sensitive. >> 8 = active low level-sensitive. >> +- interrupt-controller: Mark the device node as an interrupt controller. >> >> OMAP specific properties: >> - ti,hwmods: Name of the hwmod associated to the GPIO: >> > > Thanks. Do you mind putting "interrupt-controller" before > "#interrupt-cells" as I see this is how they have it in > Documenation/devicetree/bindings/interrupt-controller/interrupts.txt? > Otherwise ... > > Acked-by: Jon Hunter <[email protected]> > > Cheers > Jon > --
Hi Jon, thanks for the feedback. I just looked at Documentation/devicetree/bindings/gpio/gpio.txt and realized that gpio-controller and #gpio-cells should be flipped as well. Will send a v2 with both changes. Best regards, Javier _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
