Hi,
This series adds some device nodes for imx27 and board files for Phytec
phyCARD-S SOM and RDK. It is based on shawn's branch "imx/dt".
Regards,
Markus
Changes in v3:
- Removed unnecessary clock-names from owire node
- Update memory offset
Changes in v2:
- Removed already accepted clocks patch
"ARM: mx27: Replace clk_register_clkdev with clock DT lookup"
- pca100 board file was splitted into two parts SOM and RDK
- other changes described in patch notes
Fabio Estevam (1):
ARM: imx27: Use 'AITC' for the interrupt controller name
Markus Pargmann (4):
ARM: dts: imx27: Add imx framebuffer device
ARM: dts: imx27: Add 1-wire
ARM: dts: imx27 cpufreq-cpu0 frequencies
ARM: dts: Add device tree support for phycard pca100
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 62 ++++++++++++++++++++
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 72 ++++++++++++++++++++++++
arch/arm/boot/dts/imx27.dtsi | 40 ++++++++++++-
4 files changed, 173 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
create mode 100644 arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
