Hi,
Aida Mynzhasova <[email protected]> wrote:
> Add auart2 pins configuration on its main pads
>
> Signed-off-by: Aida Mynzhasova <[email protected]>
> ---
> arch/arm/boot/dts/imx28.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 7363fde..81102b2 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -320,6 +320,19 @@
> fsl,pull-up = <0>;
> };
>
> + auart2_pins_a: auart2@0 {
> + reg = <0>;
> + fsl,pinmux-ids = <
> + 0x3080 /*
> MX28_PAD_AUART2_RX__AUART2_RX */
> + 0x3090 /*
> MX28_PAD_AUART2_TX__AUART2_TX */
> + 0x30a0 /*
> MX28_PAD_AUART2_CTS__AUART2_CTS */
> + 0x30b0 /*
> MX28_PAD_AUART2_RTS__AUART2_RTS */
>
Since commit 27572a2f ARM: dts: mxs: add pinctrl header files
it is no longer necessary to specify the padconfig values as numbers.
You should use the symbolic names instead.
> + >;
> + fsl,drive-strength = <0>;
> + fsl,voltage = <1>;
> + fsl,pull-up = <0>;
Also these should be:
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_DISABLE>;
You probably should rebase your patch to a more recent version of
linux-next.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | [email protected]
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
