READ0 and READOOB command preparation has a falltrough to SEQIN case, where the command address is specified. This is certainly confusing and makes the code less readable with no added value. Let's remove it.
Signed-off-by: Ezequiel Garcia <[email protected]> --- drivers/mtd/nand/pxa3xx_nand.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 660427e..552f92a 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -669,6 +669,11 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, if (mtd->writesize >= PAGE_CHUNK_SIZE) info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); + set_command_address(info, mtd->writesize, column, page_addr); + info->buf_count = mtd->writesize + mtd->oobsize; + memset(info->data_buff, 0xFF, info->buf_count); + break; + case NAND_CMD_SEQIN: set_command_address(info, mtd->writesize, column, page_addr); -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
