This commit splits the prepare_command_pool() function into two stages: prepare_start_command() / prepare_set_command().
This is a preparation patch without any functionality changes, and is meant to allow support for multiple page reading/writing operations. Signed-off-by: Ezequiel Garcia <[email protected]> --- drivers/mtd/nand/pxa3xx_nand.c | 44 ++++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 552f92a..d3f3959 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -607,18 +607,8 @@ static void set_command_address(struct pxa3xx_nand_info *info, } } -static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, - uint16_t column, int page_addr) +static void prepare_start_command(struct pxa3xx_nand_info *info, int command) { - int addr_cycle, exec_cmd; - struct pxa3xx_nand_host *host; - struct mtd_info *mtd; - - host = info->host[info->cs]; - mtd = host->mtd; - addr_cycle = 0; - exec_cmd = 1; - /* reset data and oob column point to handle data */ info->buf_start = 0; info->buf_count = 0; @@ -627,10 +617,6 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, info->use_spare = 1; info->retcode = ERR_NONE; info->ndcb3 = 0; - if (info->cs != 0) - info->ndcb0 = NDCB0_CSEL; - else - info->ndcb0 = 0; switch (command) { case NAND_CMD_READ0: @@ -642,14 +628,32 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, case NAND_CMD_PARAM: info->use_spare = 0; break; - case NAND_CMD_SEQIN: - exec_cmd = 0; - break; default: info->ndcb1 = 0; info->ndcb2 = 0; break; } +} + +static int prepare_set_command(struct pxa3xx_nand_info *info, int command, + uint16_t column, int page_addr) +{ + int addr_cycle, exec_cmd; + struct pxa3xx_nand_host *host; + struct mtd_info *mtd; + + host = info->host[info->cs]; + mtd = host->mtd; + addr_cycle = 0; + exec_cmd = 1; + + if (info->cs != 0) + info->ndcb0 = NDCB0_CSEL; + else + info->ndcb0 = 0; + + if (command == NAND_CMD_SEQIN) + exec_cmd = 0; addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles + host->col_addr_cycles); @@ -784,8 +788,10 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, nand_writel(info, NDTR1CS0, info->ndtr1cs0); } + prepare_start_command(info, command); + info->state = STATE_PREPARED; - exec_cmd = prepare_command_pool(info, command, column, page_addr); + exec_cmd = prepare_set_command(info, command, column, page_addr); if (exec_cmd) { init_completion(&info->cmd_complete); init_completion(&info->dev_ready); -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
