The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD.
Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Grant Likely <[email protected]> Cc: [email protected] Cc: Sascha Hauer <[email protected]> Cc: Shawn Guo <[email protected]> Cc: [email protected] Cc: Eric Bénard <[email protected]> Signed-off-by: Denis Carikli <[email protected]> Acked-by: Sascha Hauer <[email protected]> --- ChangeLog v6->v7: - Added Grant Likely in the Cc list. - Shortened the license. - The tsc2007 pads were moved in another patch. ChangeLog v5->v6: - Shawn Guo was added in the Cc. --- arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 46 ++++++++ .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 119 ++++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi new file mode 100644 index 0000000..b9cb5a5 --- /dev/null +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -0,0 +1,46 @@ +/* + * Copyright 2013 Eukréa Electromatique <[email protected]> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx35.dtsi" + +/ { + model = "Eukrea CPUIMX35"; + compatible = "eukrea,cpuimx35", "fsl,imx35"; + + memory { + reg = <0x80000000 0x8000000>; /* 128M */ + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts new file mode 100644 index 0000000..9b1af1f --- /dev/null +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -0,0 +1,119 @@ +/* + * Copyright 2013 Eukréa Electromatique <[email protected]> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "imx35-eukrea-cpuimx35.dtsi" + +/ { + model = "Eukrea CPUIMX35"; + compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys_1>; + + bp1 { + label = "BP1"; + gpios = <&gpio3 25 1>; + linux,code = <256>; + gpio-key,wakeup; + linux,input-type = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + led1 { + label = "led1"; + gpios = <&gpio3 29 1>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1 &pinctrl_esdhc1_cd>; + cd-gpios = <&gpio3 24 0>; + status = "okay"; +}; + +&i2c1 { + tlv320aic23: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; +}; + +&iomuxc { + esdhc1 { + pinctrl_esdhc1_cd: esdhc1_cd_grp-1 { + fsl,pins = < + MX35_PAD_LD18__GPIO3_24 0x80000000 + >; + }; + }; + + gpio_keys { + pinctrl_gpiokeys_1: gpiokeysgrp-1 { + fsl,pins = < + MX35_PAD_LD19__GPIO3_25 0x80000000 + >; + }; + }; + + leds { + pinctrl_gpioled: gpioledgrp-1 { + fsl,pins = < + MX35_PAD_LD23__GPIO3_29 0x80000000 + >; + }; + }; + + reg_lcd_3v3 { + pinctrl_reg_lcd_3v3: reg_lcd_3v3 { + fsl,pins = < + MX35_PAD_D3_CLS__GPIO1_4 0x80000000 + >; + }; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
