On Fri, Nov 08, 2013 at 12:43:29PM +0100, Denis Carikli wrote:
> From: Steffen Trumtrar <[email protected]>
>
> Cc: Pawel Moll <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: Stephen Warren <[email protected]>
> Cc: Ian Campbell <[email protected]>
> Cc: Grant Likely <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: [email protected]
> Cc: Russell King <[email protected]>
> Cc: Sascha Hauer <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: [email protected]
> Cc: Eric Bénard <[email protected]>
> Signed-off-by: Steffen Trumtrar <[email protected]>
> Signed-off-by: Uwe Kleine-König <[email protected]>
> Signed-off-by: Denis Carikli <[email protected]>
> ---
> ChangeLog v6->v7:
> - Added Grant Likely in the Cc list.
> - Added imx35-pingrp.h, and converted the rest of the patch to use it.
> - lcdc pads were moved from the dtsi into another commit.
> - A whitespace issue in the dtsi was removed.
>
> ChangeLog v5->v6:
> - The dependency on pdata clocks has been removed,
> and the dtsi adapted accordinly.
> - Adaptation to the for-next branch of Shawn Guo at
> git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
> - imx35-dt.c: very small whitespace cleanup.
> - Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed.
> - dtsi: The nodes were reordered alphabetically.
> - dtsi: The aliases have been reordered alphabetically.
> - Shawn Guo was added in the Cc.
> ---
> .../devicetree/bindings/clock/imx35-clock.txt | 115 ++++++
> arch/arm/boot/dts/imx35-pingrp.h | 100 ++++++
> arch/arm/boot/dts/imx35.dtsi | 368
> ++++++++++++++++++++
> arch/arm/mach-imx/Kconfig | 9 +
> arch/arm/mach-imx/Makefile | 1 +
> arch/arm/mach-imx/clk-imx35.c | 18 +
> arch/arm/mach-imx/common.h | 1 +
> arch/arm/mach-imx/imx35-dt.c | 48 +++
Please separate arch/arm/boot/dts/ bits into another patch.
> 8 files changed, 660 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
> create mode 100644 arch/arm/boot/dts/imx35-pingrp.h
> create mode 100644 arch/arm/boot/dts/imx35.dtsi
> create mode 100644 arch/arm/mach-imx/imx35-dt.c
>
> diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt
> b/Documentation/devicetree/bindings/clock/imx35-clock.txt
> new file mode 100644
> index 0000000..9f9a60d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt
> @@ -0,0 +1,115 @@
> +* Clock bindings for Freescale i.MX35
> +
> +Required properties:
> +- compatible: Should be "fsl,imx35-ccm"
> +- reg: Address and length of the register set
> +- interrupts: Should contain CCM interrupt
> +- #clock-cells: Should be <1>
> +
> +The clock consumer should specify the desired clock by having the clock
> +ID in its "clocks" phandle cell. The following is a full list of i.MX35
> +clocks and IDs.
> +
> + Clock ID
> + ---------------------------
> + ckih 0
> + mpll 1
> + ppll 2
> + mpll_075 3
> + arm 4
> + hsp 5
> + hsp_div 6
> + hsp_sel 7
> + ahb 8
> + ipg 9
> + arm_per_div 10
> + ahb_per_div 11
> + ipg_per 12
> + uart_sel 13
> + uart_div 14
> + esdhc_sel 15
> + esdhc1_div 16
> + esdhc2_div 17
> + esdhc3_div 18
> + spdif_sel 19
> + spdif_div_pre 20
> + spdif_div_post 21
> + ssi_sel 22
> + ssi1_div_pre 23
> + ssi1_div_post 24
> + ssi2_div_pre 25
> + ssi2_div_post 26
> + usb_sel 27
> + usb_div 28
> + nfc_div 29
> + asrc_gate 30
> + pata_gate 31
> + audmux_gate 32
> + can1_gate 33
> + can2_gate 34
> + cspi1_gate 35
> + cspi2_gate 36
> + ect_gate 37
> + edio_gate 38
> + emi_gate 39
> + epit1_gate 40
> + epit2_gate 41
> + esai_gate 42
> + esdhc1_gate 43
> + esdhc2_gate 44
> + esdhc3_gate 45
> + fec_gate 46
> + gpio1_gate 47
> + gpio2_gate 48
> + gpio3_gate 49
> + gpt_gate 50
> + i2c1_gate 51
> + i2c2_gate 52
> + i2c3_gate 53
> + iomuxc_gate 54
> + ipu_gate 55
> + kpp_gate 56
> + mlb_gate 57
> + mshc_gate 58
> + owire_gate 59
> + pwm_gate 60
> + rngc_gate 61
> + rtc_gate 62
> + rtic_gate 63
> + scc_gate 64
> + sdma_gate 65
> + spba_gate 66
> + spdif_gate 67
> + ssi1_gate 68
> + ssi2_gate 69
> + uart1_gate 70
> + uart2_gate 71
> + uart3_gate 72
> + usbotg_gate 73
> + wdog_gate 74
> + max_gate 75
> + admux_gate 76
> + csi_gate 77
> + csi_div 78
> + csi_sel 79
> + iim_gate 80
> + gpu2d_gate 81
> + clk_max 82
clk_max is not a clock signal and should be here.
> +
> +Examples:
> +
> +clks: ccm@53f80000 {
> + compatible = "fsl,imx35-ccm";
> + reg = <0x53f80000 0x4000>;
> + interrupts = <31>;
> + #clock-cells = <1>;
> +};
> +
> +esdhc1: esdhc@53fb4000 {
> + compatible = "fsl,imx35-esdhc";
> + reg = <0x53fb4000 0x4000>;
> + interrupts = <7>;
> + clocks = <&clks 9>, <&clks 8>, <&clks 43>;
> + clock-names = "ipg", "ahb", "per";
> + status = "disabled";
Drop 'status' line from the example.
> +};
> diff --git a/arch/arm/boot/dts/imx35-pingrp.h
> b/arch/arm/boot/dts/imx35-pingrp.h
> new file mode 100644
> index 0000000..56fa422
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-pingrp.h
> @@ -0,0 +1,100 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __DTS_IMX35_PINGRP_H
> +#define __DTS_IMX35_PINGRP_H
> +
> +#define MX35_AUDMUX_PINGRP1 \
> + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 \
> + MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 \
> + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 \
> + MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000
> +
> +#define MX35_CAN1_PINGRP1 \
> + MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x1c0 \
> + MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x1c0
> +
> +#define MX35_CAN2_PINGRP1 \
> + MX35_PAD_TX5_RX0__CAN2_TXCAN 0x1c0 \
> + MX35_PAD_TX4_RX1__CAN2_RXCAN 0x1c0
> +
> +#define MX35_ESDHC1_PINGRP1 \
> + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 \
> + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 \
> + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 \
> + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 \
> + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 \
> + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
> +
> +#define MX35_FEC_PINGRP1 \
> + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 \
> + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 \
> + MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 \
> + MX35_PAD_FEC_COL__FEC_COL 0x80000000 \
> + MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 \
> + MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 \
> + MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 \
> + MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 \
> + MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 \
> + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 \
> + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 \
> + MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 \
> + MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 \
> + MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 \
> + MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 \
> + MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 \
> + MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 \
> + MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
> +
> +#define MX35_I2C1_PINGRP1 \
> + MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 \
> + MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
> +
> +#define MX35_I2C3_PINGRP1 \
> + MX35_PAD_ATA_DATA12__I2C3_SCL 0x1c0 \
> + MX35_PAD_ATA_DATA13__I2C3_SDA 0x1c0
> +
> +#define MX35_IPU_PINGRP1 \
> + MX35_PAD_LD0__IPU_DISPB_DAT_0 0x80000000 \
> + MX35_PAD_LD1__IPU_DISPB_DAT_1 0x80000000 \
> + MX35_PAD_LD2__IPU_DISPB_DAT_2 0x80000000 \
> + MX35_PAD_LD3__IPU_DISPB_DAT_3 0x80000000 \
> + MX35_PAD_LD4__IPU_DISPB_DAT_4 0x80000000 \
> + MX35_PAD_LD5__IPU_DISPB_DAT_5 0x80000000 \
> + MX35_PAD_LD6__IPU_DISPB_DAT_6 0x80000000 \
> + MX35_PAD_LD7__IPU_DISPB_DAT_7 0x80000000 \
> + MX35_PAD_LD8__IPU_DISPB_DAT_8 0x80000000 \
> + MX35_PAD_LD9__IPU_DISPB_DAT_9 0x80000000 \
> + MX35_PAD_LD10__IPU_DISPB_DAT_10 0x80000000 \
> + MX35_PAD_LD11__IPU_DISPB_DAT_11 0x80000000 \
> + MX35_PAD_LD12__IPU_DISPB_DAT_12 0x80000000 \
> + MX35_PAD_LD13__IPU_DISPB_DAT_13 0x80000000 \
> + MX35_PAD_LD14__IPU_DISPB_DAT_14 0x80000000 \
> + MX35_PAD_LD15__IPU_DISPB_DAT_15 0x80000000 \
> + MX35_PAD_LD16__IPU_DISPB_DAT_16 0x80000000 \
> + MX35_PAD_LD17__IPU_DISPB_DAT_17 0x80000000 \
> + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000 \
> + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000 \
> + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x80000000 \
> + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000 \
> + MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x80000000
> +
> +#define MX35_UART1_PINGRP1 \
> + MX35_PAD_CTS1__UART1_CTS 0x80000000 \
> + MX35_PAD_RTS1__UART1_RTS 0x80000000 \
> + MX35_PAD_TXD1__UART1_TXD_MUX 0x80000000 \
> + MX35_PAD_RXD1__UART1_RXD_MUX 0x80000000
> +
> +#define MX35_UART2_PINGRP1 \
> + MX35_PAD_RTS2__UART2_RTS 0x80000000 \
> + MX35_PAD_CTS2__UART2_CTS 0x80000000 \
> + MX35_PAD_RXD2__UART2_RXD_MUX 0x80000000 \
> + MX35_PAD_TXD2__UART2_TXD_MUX 0x80000000
> +
> +#endif /* __DTS_IMX35_PINGRP_H */
> diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
> new file mode 100644
> index 0000000..1cf520a
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35.dtsi
> @@ -0,0 +1,368 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar, Pengutronix
> + *
> + * based on imx27.dtsi
> + *
> + * This program is free software; you can redistribute it and/or modify it
> under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#include "skeleton.dtsi"
> +#include "imx35-pinfunc.h"
> +#include "imx35-pingrp.h"
> +
> +/ {
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + };
> +
> + avic: avic-interrupt-controller@68000000 {
> + compatible = "fsl,imx35-avic", "fsl,avic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x68000000 0x10000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ckil {
> + compatible = "fsl,imx-ckil", "fixed-clock";
> + clock-frequency = <32768>;
> + };
> +
> + osc {
> + compatible = "fsl,imx-osc", "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&avic>;
> + ranges;
> +
> + L2: l2-cache@30000000 {
> + compatible = "arm,l210-cache";
> + reg = <0x30000000 0x1000>;
> + cache-unified;
> + cache-level = <2>;
> + };
> +
> + aips1: aips@43f00000 {
> + compatible = "fsl,aips", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x43f00000 0x100000>;
> + ranges;
> +
> + i2c1: i2c@43f80000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
> + reg = <0x43f80000 0x4000>;
> + clocks = <&clks 51>;
> + clock-names = "ipg_per";
> + interrupts = <10>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@43f84000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
> + reg = <0x43f84000 0x4000>;
> + clocks = <&clks 53>;
> + clock-names = "ipg_per";
> + interrupts = <3>;
> + status = "disabled";
> + };
> +
> + uart1: serial@43f90000 {
> + compatible = "fsl,imx35-uart", "fsl,imx21-uart";
> + reg = <0x43f90000 0x4000>;
> + clocks = <&clks 9>, <&clks 70>;
> + clock-names = "ipg", "per";
> + interrupts = <45>;
> + status = "disabled";
> + };
> +
> + uart2: serial@43f94000 {
> + compatible = "fsl,imx35-uart", "fsl,imx21-uart";
> + reg = <0x43f94000 0x4000>;
> + clocks = <&clks 9>, <&clks 71>;
> + clock-names = "ipg", "per";
> + interrupts = <32>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@43f98000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
> + reg = <0x43f98000 0x4000>;
> + clocks = <&clks 52>;
> + clock-names = "ipg_per";
> + interrupts = <4>;
> + status = "disabled";
> + };
> +
> + ssi1: ssi@43fa0000 {
> + compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
> + reg = <0x43fa0000 0x4000>;
> + interrupts = <11>;
> + clocks = <&clks 68>;
> + dmas = <&sdma 28 0 0>,
> + <&sdma 29 0 0>;
> + dma-names = "rx", "tx";
> + fsl,fifo-depth = <15>;
> + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0
> TX1 RX1 */
This custom property is deprecated. Please drop it.
> + status = "disabled";
> + };
> +
> + iomuxc: iomuxc@43fac000 {
> + compatible = "fsl,imx35-iomuxc";
> + reg = <0x43fac000 0x4000>;
> +
> + audmux {
> + pinctrl_audmux_1: audmuxgrp-1 {
> + fsl,pins =
> <MX35_AUDMUX_PINGRP1>;
> + };
> + };
Do not add these pinctrl nodes here. Instead, add them in <board>.dts
as needed.
> +
> + can1 {
> + pinctrl_can1_1: can1grp-1 {
> + fsl,pins = <MX35_CAN1_PINGRP1>;
> + };
> + };
> +
> + can2 {
> + pinctrl_can2_1: can2grp-1 {
> + fsl,pins = <MX35_CAN2_PINGRP1>;
> + };
> + };
> +
> + esdhc1 {
> + pinctrl_esdhc1_1: esdhc1grp-1 {
> + fsl,pins =
> <MX35_ESDHC1_PINGRP1>;
> + };
> + };
> +
> + fec {
> + pinctrl_fec_1: fecgrp-1 {
> + fsl,pins = <MX35_FEC_PINGRP1>;
> + };
> + };
> +
> + i2c1 {
> + pinctrl_i2c1_1: i2c1grp-1 {
> + fsl,pins = <MX35_I2C1_PINGRP1>;
> + };
> + };
> +
> + i2c3 {
> + pinctrl_i2c3_1: i2c3grp-1 {
> + fsl,pins = <MX35_I2C3_PINGRP1>;
> + };
> + };
> +
> + uart1 {
> + pinctrl_uart1_1: uart1grp-1 {
> + fsl,pins = <MX35_UART1_PINGRP1>;
> + };
> + };
> +
> + uart2 {
> + pinctrl_uart2_1: uart2grp-1 {
> + fsl,pins = <MX35_UART2_PINGRP1>;
> + };
> + };
> + };
> + };
> +
> + spba: spba-bus@50000000 {
> + compatible = "fsl,spba-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x50000000 0x100000>;
> + ranges;
> +
> + uart3: serial@5000c000 {
> + compatible = "fsl,imx35-uart", "fsl,imx21-uart";
> + reg = <0x5000c000 0x4000>;
> + clocks = <&clks 9>, <&clks 72>;
> + clock-names = "ipg", "per";
> + interrupts = <18>;
> + status = "disabled";
> + };
> +
> + fec: fec@50038000 {
> + compatible = "fsl,imx35-fec", "fsl,imx27-fec";
> + reg = <0x50038000 0x4000>;
> + clocks = <&clks 46>, <&clks 8>;
> + clock-names = "ipg", "ahb";
> + interrupts = <57>;
> + status = "disabled";
> + };
> + };
> +
> + aips2: aips@53f00000 {
> + compatible = "fsl,aips", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x53f00000 0x100000>;
> + ranges;
> +
> + clks: ccm@53f80000 {
> + compatible = "fsl,imx35-ccm";
> + reg = <0x53f80000 0x4000>;
> + interrupts = <31>;
> + #clock-cells = <1>;
> + };
> +
> + gpio3: gpio@53fa4000 {
> + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
> + reg = <0x53fa4000 0x4000>;
> + interrupts = <56>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + esdhc1: esdhc@53fb4000 {
> + compatible = "fsl,imx35-esdhc";
> + reg = <0x53fb4000 0x4000>;
> + interrupts = <7>;
> + clocks = <&clks 9>, <&clks 8>, <&clks 43>;
> + clock-names = "ipg", "ahb", "per";
> + status = "disabled";
> + };
> +
> + esdhc2: esdhc@53fb8000 {
> + compatible = "fsl,imx35-esdhc";
> + reg = <0x53fb8000 0x4000>;
> + interrupts = <8>;
> + clocks = <&clks 9>, <&clks 8>, <&clks 44>;
> + clock-names = "ipg", "ahb", "per";
> + status = "disabled";
> + };
> +
> + esdhc3: esdhc@53fbc000 {
> + compatible = "fsl,imx35-esdhc";
> + reg = <0x53fbc000 0x4000>;
> + interrupts = <9>;
> + clocks = <&clks 9>, <&clks 8>, <&clks 45>;
> + clock-names = "ipg", "ahb", "per";
> + status = "disabled";
> + };
> +
> + audmux: audmux@53fc4000 {
> + compatible = "fsl,imx35-audmux",
> "fsl,imx31-audmux";
> + reg = <0x53fc4000 0x4000>;
> + status = "disabled";
> + };
> +
> + gpio1: gpio@53fcc000 {
> + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
> + reg = <0x53fcc000 0x4000>;
> + interrupts = <52>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio@53fd0000 {
> + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
> + reg = <0x53fd0000 0x4000>;
> + interrupts = <51>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sdma: sdma@53fd4000 {
> + compatible = "fsl,imx35-sdma";
> + reg = <0x53fd4000 0x4000>;
> + clocks = <&clks 9>, <&clks 65>;
> + clock-names = "ipg", "ahb";
> + #dma-cells = <3>;
> + interrupts = <34>;
> + fsl,sdma-ram-script-name =
> "imx/sdma/sdma-imx35.bin";
> + };
> +
> + wdog: wdog@53fdc000 {
> + compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
> + reg = <0x53fdc000 0x4000>;
> + clocks = <&clks 74>;
> + clock-names = "";
> + interrupts = <55>;
> + };
> +
> + can1: can@53fe4000 {
> + compatible = "fsl,imx35-flexcan",
> "fsl,p1010-flexcan";
> + reg = <0x53fe4000 0x1000>;
> + clocks = <&clks 33>;
> + clock-names = "ipg";
> + interrupts = <43>;
> + status = "disabled";
> + };
> +
> + can2: can@53fe8000 {
> + compatible = "fsl,imx35-flexcan",
> "fsl,p1010-flexcan";
> + reg = <0x53fe8000 0x1000>;
> + clocks = <&clks 34>;
> + clock-names = "ipg";
> + interrupts = <44>;
> + status = "disabled";
> + };
> + };
> +
> + emi@80000000 { /* External Memory Interface */
> + compatible = "fsl,emi", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80000000 0x40000000>;
> + ranges;
> +
> + nfc: nand@bb000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
Drop this blank line.
> + compatible = "fsl,imx35-nand", "fsl,imx25-nand";
> + reg = <0xbb000000 0x2000>;
> + clocks = <&clks 29>;
> + clock-names = "";
> + interrupts = <33>;
> + status = "disabled";
> + };
> +
> + weim: weim@b8002000 {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + compatible = "fsl,imx35-weim";
> + reg = <0xb8002000 0x1000>;
> + ranges = <
> + 0 0 0xa0000000 0x8000000
> + 1 0 0xa8000000 0x8000000
> + 2 0 0xb0000000 0x2000000
> + 3 0 0xb2000000 0x2000000
> + 4 0 0xb4000000 0x2000000
> + 5 0 0xb6000000 0x2000000
> + >;
> + status = "disabled";
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 2b90984..b1b3b6a 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -616,6 +616,15 @@ config MACH_IMX31_DT
>
> comment "MX35 platforms:"
>
> +config MACH_IMX35_DT
> + bool "Support i.MX35 platforms from device tree"
> + select SOC_IMX35
> + select PINCTRL
> + select PINCTRL_IMX35
Sort these selects alphabetically.
Shawn
> + help
> + Include support for Freescale i.MX35 based platforms
> + using the device tree for discovery.
> +
> config MACH_PCM043
> bool "Support Phytec pcm043 (i.MX35) platforms"
> select IMX_HAVE_PLATFORM_FLEXCAN
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 0db1697..befcaf5 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
> obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
> obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
> obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
> +obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
>
> obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
> obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
> index 2193c83..cea861b 100644
> --- a/arch/arm/mach-imx/clk-imx35.c
> +++ b/arch/arm/mach-imx/clk-imx35.c
> @@ -45,6 +45,8 @@ static struct arm_ahb_div clk_consumer[] = {
> static char hsp_div_532[] = { 4, 8, 3, 0 };
> static char hsp_div_400[] = { 3, 6, 3, 0 };
>
> +static struct clk_onecell_data clk_data;
> +
> static const char *std_sel[] = {"ppll", "arm"};
> static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
>
> @@ -286,3 +288,19 @@ int __init mx35_clocks_init(void)
>
> return 0;
> }
> +
> +int __init mx35_clocks_init_dt(void)
> +{
> + struct device_node *np;
> + void __iomem *base;
> + int irq;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
> + clk_data.clks = clk;
> + clk_data.clk_num = ARRAY_SIZE(clk);
> + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> +
> + mx35_clocks_init();
> +
> + return 0;
> +}
> diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
> index 59c3b9b..6919b7d 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -65,6 +65,7 @@ int mx35_clocks_init(void);
> int mx51_clocks_init(unsigned long ckil, unsigned long osc,
> unsigned long ckih1, unsigned long ckih2);
> int mx25_clocks_init_dt(void);
> +int mx35_clocks_init_dt(void);
> int mx27_clocks_init_dt(void);
> int mx31_clocks_init_dt(void);
> struct platform_device *mxc_register_gpio(char *name, int id,
> diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
> new file mode 100644
> index 0000000..e3def45
> --- /dev/null
> +++ b/arch/arm/mach-imx/imx35-dt.c
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar, Pengutronix
> + *
> + * based on imx27-dt.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +#include <asm/hardware/cache-l2x0.h>
> +#include "common.h"
> +#include "mx35.h"
> +
> +static void __init imx35_dt_init(void)
> +{
> + mxc_arch_reset_init_dt();
> +
> + of_platform_populate(NULL, of_default_bus_match_table,
> + NULL, NULL);
> +}
> +
> +static void __init imx35_timer_init(void)
> +{
> + mx35_clocks_init_dt();
> +}
> +
> +static const char *imx35_dt_board_compat[] __initdata = {
> + "fsl,imx35",
> + NULL
> +};
> +
> +DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
> + .map_io = mx35_map_io,
> + .init_early = imx35_init_early,
> + .init_irq = mx35_init_irq,
> + .handle_irq = imx35_handle_irq,
> + .init_time = imx35_timer_init,
> + .init_machine = imx35_dt_init,
> + .dt_compat = imx35_dt_board_compat,
> + .restart = mxc_restart,
> +MACHINE_END
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
