Add MDIO bus node segment and update the example, allowing trivial bindings to break out boilerplate.
Signed-off-by: Jonas Jensen <[email protected]> --- Notes: Changes per reply from Grant [0] [0] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-November/208851.html Applies to next-20131111 Documentation/devicetree/bindings/net/phy.txt | 37 +++++++++++++++++++++------ 1 file changed, 29 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 7cd18fb..4e58a5d 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -1,3 +1,13 @@ +MDIO Bus Nodes + +MDIO bus nodes describe an MDIO bus. It is a container for PHY nodes as +described below. + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; + + PHY nodes Required properties: @@ -23,13 +33,24 @@ Optional Properties: assume clause 22. The compatible list may also contain other elements. + Example: -ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - linux,phandle = <2452000>; - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <0>; - device_type = "ethernet-phy"; -}; +mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + device_type = "ethernet-phy"; + compatible = "...", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupts = <24 0>; + } + + ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "..."; + reg = <1>; + interrupts = <35 1>; + } +} -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
