Add MDIO bus node segment and update the example, allowing trivial bindings to break out boilerplate.
Signed-off-by: Jonas Jensen <[email protected]> --- Notes: Thanks Mark, This should have the changes from your comments. It also adds optional properties "compatible" and "reg", were those overlooked or left out intentionally? Changes since v1: 1. reformat "MDIO bus node" description and add, node name should be "mdio" 2. reformat property descriptions, describe what the cells represent 3. add optional properties 4. add a description after "PHY nodes" Applies to next-20131113 Documentation/devicetree/bindings/net/phy.txt | 48 ++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 7cd18fb..4179a70 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -1,5 +1,26 @@ +MDIO Bus Nodes + +An MDIO bus node describes an MDIO bus, and is a container for PHY nodes +as described below. An MDIO bus node should be named "mdio". + +Required properties: + +- #address-cells = Should be <1>, specifies the number of cells needed + to encode the PHY address +- #size-cells = Should be <0> + +Optional Properties: + +- compatible : Should contain a specific name for the MDIO bus, + if known, followed by "-mdio" +- reg : Should contain register location and length + + PHY nodes +Describes the PHY chip. A MAC connecting the PHY may use a phandle to +this node. + Required properties: - device_type : Should be "ethernet-phy" @@ -23,13 +44,24 @@ Optional Properties: assume clause 22. The compatible list may also contain other elements. + Example: -ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - linux,phandle = <2452000>; - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <0>; - device_type = "ethernet-phy"; -}; +mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + device_type = "ethernet-phy"; + compatible = "...", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupts = <24 0>; + } + + ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "..."; + reg = <1>; + interrupts = <35 1>; + } +} -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
