Enable pci1 and pci2 nodes for USB controllers attached to the AHB<>PCI bridge devices. Node pci0 is enabled for the moment as a device, but could be switched to usb-gadget mode later.
Signed-off-by: Ben Dooks <[email protected]> Reviewed-by: Ian Molton <[email protected]> --- Cc: [email protected] (open list:ARM/SHMOBILE ARM...) Cc: [email protected] (open list:OPEN FIRMWARE AND...) Cc: Magnus Damm <[email protected]> (supporter:ARM/SHMOBILE ARM...) Cc: Simon Horman <[email protected]> (supporter:ARM/SHMOBILE ARM...) --- arch/arm/boot/dts/r8a7790-lager.dts | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 57569cb..8dfcd25 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -80,6 +80,22 @@ renesas,groups = "mmc1_data8", "mmc1_ctrl"; renesas,function = "mmc1"; }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb"; + }; + + usb2_pins: usb2 { + renesas,groups = "usb2"; + renesas,function = "usb"; + }; + }; &mmcif1 { @@ -91,3 +107,21 @@ non-removable; status = "okay"; }; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pci2 { + status = "okay"; + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; +}; -- 1.8.5.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
