Add node for USB PHY driver to the base R8A7790 device tree include file. It is up to the board file to enable and configure it as necessary.
Signed-off-by: Ben Dooks <[email protected]> Reviewed-by: Ian Molton <[email protected]> --- Cc: [email protected] (open list:OPEN FIRMWARE AND...) Cc: Magnus Damm <[email protected]> (supporter:ARM/SHMOBILE ARM...) Cc: Simon Horman <[email protected]> (supporter:ARM/SHMOBILE ARM...) Cc: [email protected] (open list:ARM/SHMOBILE ARM...) --- arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index c5e9783..ea180a5 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -758,4 +758,12 @@ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + usbphy: usbphy@e6590100 { + compatible = "renesas,usb-phy-r8a7790"; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clock-names = "usbhs"; + reg = < 0x0 0xe6590100 0x0 0x100>; + status = "disabled"; + }; }; -- 1.8.5.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
