On Thursday 20 March 2014 04:08 PM, Ivan Khoronzhuk wrote:
> From: Murali Karicheri <[email protected]>
> 
> Sub page write doesn't work because of hw issue in controller found on
> Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
> don't seems to have any issue. So add "ti,keysone-nand" compatible
> to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.
> 
> Cc: Brian Norris <[email protected]>
> Cc: Warner Losh <[email protected]>
> Cc: Santosh Shilimkar <[email protected]>
> 
> Signed-off-by: Murali Karicheri <[email protected]>
> Signed-off-by: Ivan Khoronzhuk <[email protected]>
> ---
> 
Acked-by: Santosh Shilimkar <[email protected]>

> This patch is a result of discussion on patch v1:
> https://lkml.org/lkml/2014/3/20/461
> 
>  drivers/mtd/nand/davinci_nand.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
> index 4615d79..b922c8e 100644
> --- a/drivers/mtd/nand/davinci_nand.c
> +++ b/drivers/mtd/nand/davinci_nand.c
> @@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 = {
>  #if defined(CONFIG_OF)
>  static const struct of_device_id davinci_nand_of_match[] = {
>       {.compatible = "ti,davinci-nand", },
> +     {.compatible = "ti,keystone-nand", },
>       {},
>  };
>  MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
> @@ -581,6 +582,11 @@ static struct davinci_nand_pdata
>                   of_property_read_bool(pdev->dev.of_node,
>                       "ti,davinci-nand-use-bbt"))
>                       pdata->bbt_options = NAND_BBT_USE_FLASH;
> +
> +             if (of_device_is_compatible(pdev->dev.of_node,
> +                                         "ti,keystone-nand")) {
> +                     pdata->options |= NAND_NO_SUBPAGE_WRITE;
> +             }
>       }
>  
>       return dev_get_platdata(&pdev->dev);
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to