Hello.
On 05/29/2014 03:00 PM, Yoshihiro Shimoda wrote:
Signed-off-by: Yoshihiro Shimoda <[email protected]>
---
arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e06c486..e6b04f2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -902,4 +902,14 @@
#size-cells = <0>;
status = "disabled";
};
+
+ xhci: xhci@ee000000 {
The node name should be "usb@ee000000", according to section 2.2.2 of the
ePAPR standard [1]:
+ compatible = "renesas,xhci-r8a7790";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ phys = <&usbphy 1 1>;
This part is dependent on the generic PHY support in the USB HCD in order
to work.
+ phy-names = "usb";
+ status = "disabled";
+ };
};
[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
