Hello. (2014/05/30 1:08), Sergei Shtylyov wrote: > Hello. > > On 05/29/2014 03:00 PM, Yoshihiro Shimoda wrote: > >> Signed-off-by: Yoshihiro Shimoda <[email protected]> >> --- >> arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++ >> 1 file changed, 10 insertions(+) > >> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi >> index e06c486..e6b04f2 100644 >> --- a/arch/arm/boot/dts/r8a7790.dtsi >> +++ b/arch/arm/boot/dts/r8a7790.dtsi >> @@ -902,4 +902,14 @@ >> #size-cells = <0>; >> status = "disabled"; >> }; >> + >> + xhci: xhci@ee000000 { > > The node name should be "usb@ee000000", according to section 2.2.2 of the > ePAPR standard [1]:
Thank you for the point! I will fix this and r8a7791's one. >> + compatible = "renesas,xhci-r8a7790"; >> + reg = <0 0xee000000 0 0xc00>; >> + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; >> + phys = <&usbphy 1 1>; > > This part is dependent on the generic PHY support in the USB HCD in order > to work. This means that I should wait to add this parameter until the generic USB PHY Gen2 driver is supported in upstream? Best regards, Yoshihiro Shimoda >> + phy-names = "usb"; >> + status = "disabled"; >> + }; >> }; > > [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf > > WBR, Sergei > -- Yoshihiro Shimoda -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
