From: Rob Clark <[email protected]> This patch adds MDP node to APQ8064 dt.
Signed-off-by: Srinivas Kandagatla <[email protected]> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 112 ++++++++++++++++++++++++++++++++++++ 1 file changed, 112 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index e65aff0..9c2e9b2 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1,6 +1,7 @@ /dts-v1/; #include "skeleton.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> @@ -94,6 +95,20 @@ }; }; + hdmi_pinctrl: hdmi-pinctrl { + mux1 { + pins = "gpio69", "gpio70", "gpio71"; + function = "hdmi"; + bias-pull-up; + drive-strength = <2>; + }; + mux2 { + pins = "gpio72"; + function = "hdmi"; + bias-pull-down; + drive-strength = <16>; + }; + }; ps_hold: ps_hold { mux { pins = "gpio78"; @@ -228,6 +243,18 @@ }; }; + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; @@ -426,6 +453,13 @@ reg = <QCOM_RPM_PM8921_LDO27>; }; + pm8921_hdmi_mvs: pm8921-hdmi-mvs { + compatible = "qcom,rpm-pm8921-switch"; + reg = <QCOM_RPM_HDMI_SWITCH>; + regulator-always-on; + bias-pull-down; + }; + pm8921_l28: pm8921-l28 { compatible = "qcom,rpm-pm8921-nldo1200"; reg = <QCOM_RPM_PM8921_LDO28>; @@ -704,5 +738,83 @@ pinctrl-0 = <&sdc4_gpios>; }; }; + + hdmi: qcom,hdmi-tx@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x1000>; + interrupts = <GIC_SPI 79 0>; + clock-names = + "core_clk", + "master_iface_clk", + "slave_iface_clk"; + clocks = + <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70 + GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71 + GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-hpd = <&tlmm_pinmux 72 + GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; + }; + + gpu: qcom,adreno-3xx@4300000 { + compatible = "qcom,adreno-3xx"; + reg = <0x04300000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 80 0>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core_clk", + "iface_clk", + "mem_clk", + "mem_iface_clk"; + clocks = + <&mmcc GFX3D_CLK>, + <&mmcc GFX3D_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>, + <&mmcc MMSS_IMEM_AHB_CLK>; + qcom,chipid = <0x03020002>; + qcom,gpu-pwrlevels { + compatible = "qcom,gpu-pwrlevels"; + qcom,gpu-pwrlevel@0 { + qcom,gpu-freq = <450000000>; + }; + qcom,gpu-pwrlevel@1 { + qcom,gpu-freq = <27000000>; + }; + }; + }; + + mdp: qcom,mdp@5100000 { + compatible = "qcom,mdp"; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 0>; + connectors = <&hdmi>; + gpus = <&gpu>; + clock-names = + "core_clk", + "iface_clk", + "lut_clk", + "src_clk", + "hdmi_clk", + "mdp_clk", + "mdp_axi_clk"; + clocks = + <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc TV_SRC>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>, + <&mmcc MDP_AXI_CLK>; +// vdd-supply = <&footswitch_mdp>; + }; }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
