From: Nicolas Dechesne <[email protected]> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
Signed-off-by: Nicolas Dechesne <[email protected]> --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index af2e075..6349f24 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -41,6 +41,11 @@ }; }; + /* OTG */ + usb1_phy:phy@12500000 { + status = "ok"; + }; + usb3_phy:phy@12520000 { status = "ok"; }; @@ -48,7 +53,16 @@ usb4_phy:phy@12530000 { status = "ok"; }; - + + gadget1:gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + usb3: usb@12520000 { status = "ok"; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
