On Thu, Mar 26, 2015 at 05:38:24PM +0000, Ben Dooks wrote: > The SAM5D3 Xplained device tree is missing hte vqmmc node which is > tied to 3.3V on the board. Add this to avoid the kernel warning that > there is no vqmmc node. > > atmel_mci f0000000.mmc: No vqmmc regulator found > > Signed-off-by: Ben Dooks <[email protected]> > -- > CC: [email protected] > CC: Andrew Victor <[email protected]> > CC: Nicolas Ferre <[email protected]> > CC: Jean-Christophe Plagniol-Villard <[email protected]> > CC: Rob Herring <[email protected]> > CC: Pawel Moll <[email protected]> > CC: Mark Rutland <[email protected]> > CC: Ian Campbell <[email protected]> > CC: Kumar Gala <[email protected]> > CC: Russell King <[email protected]> > CC: [email protected] > CC: [email protected] > --- > arch/arm/boot/dts/at91-sama5d3_xplained.dts | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts > b/arch/arm/boot/dts/at91-sama5d3_xplained.dts > index 652c4dd..1eb150d 100644 > --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts > +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts > @@ -36,6 +36,7 @@ > mmc0: mmc@f0000000 { > pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 > &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; > status = "okay"; > + vqmmc-supply = <&vcc_3v3_reg>;
above status would be better, usually we keep status at the latest property even if in this cas we have slot after... Otherwise Acked-by: Ludovic Desroches <[email protected]> > slot@0 { > reg = <0>; > bus-width = <8>; > -- > 2.1.4 > > > _______________________________________________ > linux-arm-kernel mailing list > [email protected] > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
