On 08/19/2015 07:12 PM, Vinod Koul wrote:
> On Tue, Jul 28, 2015 at 11:38:06AM +0200, Lars-Peter Clausen wrote:
>> +static void axi_dmac_start_transfer(struct axi_dmac_chan *chan)
>> +{
>> + struct axi_dmac *dmac = chan_to_axi_dmac(chan);
>> + struct virt_dma_desc *vdesc;
>> + struct axi_dmac_desc *desc;
>> + struct axi_dmac_sg *sg;
>> + unsigned int flags = 0;
>> + unsigned int val;
>> +
>> + val = axi_dmac_read(dmac, AXI_DMAC_REG_START_TRANSFER);
>> + if (val) /* Queue is full, wait for the next SOT IRQ */
>> + return;
>> +
>> + desc = chan->next_desc;
>> +
>> + if (!desc) {
>> + vdesc = vchan_next_desc(&chan->vchan);
>> + if (!vdesc)
>> + return;
>> + list_move_tail(&vdesc->node, &chan->active_descs);
>> + desc = to_axi_dmac_desc(vdesc);
>> + }
>> + sg = &desc->sg[desc->num_submitted];
>> +
>> + desc->num_submitted++;
>> + if (desc->num_submitted == desc->num_sgs)
>> + chan->next_desc = NULL;
>> + else
>> + chan->next_desc = desc;
>> +
>> + sg->id = axi_dmac_read(dmac, AXI_DMAC_REG_TRANSFER_ID);
>> +
>> + if (axi_dmac_dest_is_mem(chan)) {
>> + axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, sg->dest_addr);
>> + axi_dmac_write(dmac, AXI_DMAC_REG_DEST_STRIDE, sg->dest_stride);
>> + }
>> +
>> + if (axi_dmac_src_is_mem(chan)) {
>> + axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, sg->src_addr);
>> + axi_dmac_write(dmac, AXI_DMAC_REG_SRC_STRIDE, sg->src_stride);
>> + }
>> +
>> + /*
>> + * If the hardware supports cyclic transfers and there is no callback to
>> + * call, enable hw cyclic mode to avoid unnecessary interrupts.
>> + */
>> + if (chan->hw_cyclic && desc->cyclic && !desc->vdesc.tx.callback)
>> + flags |= AXI_DMAC_FLAG_CYCLIC;
>> +
>> + axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, sg->x_len - 1);
>> + axi_dmac_write(dmac, AXI_DMAC_REG_Y_LENGTH, sg->y_len - 1);
>> + axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, flags);
>> + axi_dmac_write(dmac, AXI_DMAC_REG_START_TRANSFER, 1);
>> +}
>
> On Wed, Aug 19, 2015 at 06:55:34PM +0200, Lars-Peter Clausen wrote:
>> On 08/19/2015 06:32 PM, Vinod Koul wrote:
>>> On Tue, Jul 28, 2015 at 11:38:06AM +0200, Lars-Peter Clausen wrote:
>>>> + desc = axi_dmac_alloc_desc(sg_len);
>>>> + if (!desc)
>>>> + return NULL;
>>>> +
>>>> + for_each_sg(sgl, sg, sg_len, i) {
>>>> + if (!axi_dmac_check_addr(chan, sg_dma_address(sg)) ||
>>>> + !axi_dmac_check_len(chan, sg_dma_len(sg))) {
>>>> + kfree(desc);
>>>> + return NULL;
>>>> + }
>>>> +
>>>> + if (direction == DMA_DEV_TO_MEM)
>>>> + desc->sg[i].dest_addr = sg_dma_address(sg);
>>>> + else
>>>> + desc->sg[i].src_addr = sg_dma_address(sg);
>>> where is device side programming ?
>>
>> in the start_transfer() function.
>
> I must have missed that but still don't see it here, can you point me
Oh you mean the DMA address for the device? It's a dedicated bus on the
device side, so there is no address to program on the device side.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
