Add the binding documentation for the Epson RX6110 RTC.
Signed-off-by: Steffen Trumtrar <[email protected]>
---
I'm not sure what the current policy for such simple SPI bindings is.
Are they necessary?
.../devicetree/bindings/rtc/epson,rtc-rx6110.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
diff --git a/Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
b/Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
new file mode 100644
index 000000000000..7ce7ae761657
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
@@ -0,0 +1,25 @@
+Epson RX6110 Real Time Clock
+============================
+
+The Epson RX6110 can be used with SPI or I2C busses. The kind of
+bus depends on the SPISEL pin and can not be configured via software.
+
+SPI mode
+--------
+
+Required properties:
+- compatible: should be: "epson,rtc-rx6110"
+- reg: chip select number
+- spi-cs-high: RX6110 needs chipselect high
+- spi-cpha: RX6110 works with SPI shifted clock phase
+- spi-cpol: RX6110 works with SPI inverse clock polarity
+
+Example:
+
+ rtc: rtc@3 {
+ compatible = "epson,rtc-rx6110"
+ reg = <3>
+ spi-cs-high;
+ spi-cpba;
+ spi-cpol;
+ };
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
