To be honest, the Node Configuration dialogs were not designed with 640x480 resolution in mind. If you use Internet Explorer, or another similar web browser, I'm sure you'd already find that the 640x480 resolution is limiting enough. You would most likley find that much of the freesite content is unsuitable for such a low resolution also.
However, a seasoned Windows (R) user like yourself will almost certainly already know that ENTER will trigger the OK button on the dialog and ESC will trigger the CANCEL button. If you really must insist in running in the lowest possible resolution that Windows (R) supports, then I really must insist that either a) Enable some kind of virtual desktop settings so you can at least scroll your 640x480 window around a virtual desktop of even 1024x768. (crazy), or b) you do not attempt to use the Node Configuration program ever again - instead use a simple text editor and edit Freenet.ini manually. Is this really a devl@ question or should it have been a support@ question? Dave ----- Original Message ----- From: "Matthew Harrison" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, May 28, 2002 11:32 PM Subject: RE: [freenet-dev] Node Config Program and Announce List > The windows config program dialogue box is slightly too large on my > machine. Even with the windows task bar docked at the side of the screen, I > can't see the OK and CANCEL buttons. I'm running at 640x480. _______________________________________________ devl mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/devl
