I am running build 5024 and for whatever reason, everything seems to be running a bit better now. Still at 100% load and everything seems to be working ok. I have 510 of 512 connections open at the moment.
I'm guessing the load is calculated based upon the number of open connections compared to the max number of connections, or am I horribly wrong on this? Thanks, Eric > Eric Thacker ([EMAIL PROTECTED]) wrote: > >> I just did a new install (downloaded from website on a new machine) and >> within 12 hours my node was running at 100% load with over 500 open >> connections. > > Excellent! > >> The strange thing is that I can't even >> pull up TFE (or much of anything for that matter) > > 1) TFE was missing yesterday. It's back today (August 15th UTC). > > 2) Is your system clock set correctly? DBR sites will fail to work > if your clock is not right. > >> Debian Linux >> Sun JRE1.4.1 >> 1.6 Ghz AMD Athalon >> 1 Gig RAM >> 2 Gig datastore >> Node uptime 22 hours > > 3) What Freenet build number? Make sure it's at least relatively > recent. The current stable build number is 5024. Build 5023 > and possibly a few before that have a serious bug which causes > DoS attacks against other node operators under some conditions; > 5024 is strongly recommended. > > 4) Make sure you aren't firewalled, etc. From your description, it > sounds like this isn't the problem, but it's worth mentioning. > > -- > Greg Wooledge | "Truth belongs to everybody." > [EMAIL PROTECTED] | - The Red Hot Chili Peppers > http://wooledge.org/~greg/ | > _______________________________________________ devl mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org:8080/cgi-bin/mailman/listinfo/devl
