Costas Dokolas <cdokolas at Sunsoftgr.com> writes: > I'm re-posting this to the devl list as I didn't get an answer from the > support list... > > --- > > Hi, I'm new to the list and sort of new to freenet. > > I'm running a transient node at home and noticed that although some nodes > seem unreachable (Connection Attempts: X, Successful Connections: 0 (0%)) > their CP is still 1.0! > Running a node at the office LAN (no contact with the internet) seems to > work as expected, i.e. all nodes in the list get their CP lowered with each > attempt (since they can't be reached), except the other test node within the > LAN which has gained an advantage over the others by being available some of > the time (had some initial problems making contact). > > Any clues? > > Doc > CP on nodes that have just come back from being shunned (i.e. backed off because of connection failures, etc.) is set to 1.0 so that they'll be tried again; otherwise a node would come back with a really low CP and never get tried even if it was back at full.
Thelema -- E-mail: thelema314 at swbell.net Raabu and Piisu GPG 1024D/36352AAB fpr:756D F615 B4F3 BFFC 02C7 84B7 D8D7 6ECE 3635 2AAB _______________________________________________ devl mailing list devl at freenetproject.org http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/devl
