Assuming that your host system is set up to use CUPS, you need to configure it to allow it to bind with the docker0 bridge network. Or you could try to mount the local cups socket against the image when you mount.
Either way, it is going to be futzy and I would not recommend it. [image: KiCad Services Corporation Logo] Seth Hillbrand *Lead Developer* +1-530-302-5483 Long Beach, CA www.kipro-pcb.com i...@kipro-pcb.com On Mon, Jan 13, 2025 at 9:01 AM Salvador E. Tropea <stro...@inti.gob.ar> wrote: > Hi! > > I tried the docker images and I can't get pcbnew to print anything useful. > > I know the print option relies on the OS so I don't know if this is > something particular to Debian (used in the docker images) or is a > general issue. > > I tried with the attached PCB printing the F/B.Cu layers and the Edge.Cuts > > Regards, SET > > -- > You received this message because you are subscribed to the Google Groups > "KiCad Developers" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to devlist+unsubscr...@kicad.org. > To view this discussion visit > https://groups.google.com/a/kicad.org/d/msgid/devlist/728153bc-3363-4c1c-9c5d-9f6f06366335%40inti.gob.ar > . > -- You received this message because you are subscribed to the Google Groups "KiCad Developers" group. To unsubscribe from this group and stop receiving emails from it, send an email to devlist+unsubscr...@kicad.org. To view this discussion visit https://groups.google.com/a/kicad.org/d/msgid/devlist/CAFdeG-oD4fK5V%2BPh2L7uwzhdA8cJCwSwJqNUaLHp6Ywnn_ubLQ%40mail.gmail.com.
