Hi, I'm working on Windows at the moment and the print works. But all the layers are deselected by default, so I need to select what layer to print first (else I expect that I would get a blank page as well).
Mojca On Tue, 14 Jan 2025 at 10:24, Salvador E. Tropea <stro...@inti.gob.ar> wrote: > I'm printing to a file. The file doesn't contain anything useful. > > I'm attaching the results. > > My question is much more simple: on your system, can you get something > useful from KiCad 9 RC1 print? > On 13/1/25 14:09, 'Seth Hillbrand' via KiCad Developers wrote: > > Assuming that your host system is set up to use CUPS, you need to > configure it to allow it to bind with the docker0 bridge network. Or you > could try to mount the local cups socket against the image when you mount. > > Either way, it is going to be futzy and I would not recommend it. > > [image: KiCad Services Corporation Logo] > Seth Hillbrand > *Lead Developer* > +1-530-302-5483 > Long Beach, CA > www.kipro-pcb.com i...@kipro-pcb.com > > > On Mon, Jan 13, 2025 at 9:01 AM Salvador E. Tropea <stro...@inti.gob.ar> > wrote: > >> Hi! >> >> I tried the docker images and I can't get pcbnew to print anything useful. >> >> I know the print option relies on the OS so I don't know if this is >> something particular to Debian (used in the docker images) or is a >> general issue. >> >> I tried with the attached PCB printing the F/B.Cu layers and the Edge.Cuts >> >> Regards, SET >> >> -- >> You received this message because you are subscribed to the Google Groups >> "KiCad Developers" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to devlist+unsubscr...@kicad.org. >> To view this discussion visit >> https://groups.google.com/a/kicad.org/d/msgid/devlist/728153bc-3363-4c1c-9c5d-9f6f06366335%40inti.gob.ar >> . >> > -- > You received this message because you are subscribed to the Google Groups > "KiCad Developers" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to devlist+unsubscr...@kicad.org. > To view this discussion visit > https://groups.google.com/a/kicad.org/d/msgid/devlist/CAFdeG-oD4fK5V%2BPh2L7uwzhdA8cJCwSwJqNUaLHp6Ywnn_ubLQ%40mail.gmail.com > <https://groups.google.com/a/kicad.org/d/msgid/devlist/CAFdeG-oD4fK5V%2BPh2L7uwzhdA8cJCwSwJqNUaLHp6Ywnn_ubLQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "KiCad Developers" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to devlist+unsubscr...@kicad.org. > To view this discussion visit > https://groups.google.com/a/kicad.org/d/msgid/devlist/eeecd40e-bf49-4f9c-8707-a33f7b124312%40inti.gob.ar > <https://groups.google.com/a/kicad.org/d/msgid/devlist/eeecd40e-bf49-4f9c-8707-a33f7b124312%40inti.gob.ar?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "KiCad Developers" group. To unsubscribe from this group and stop receiving emails from it, send an email to devlist+unsubscr...@kicad.org. To view this discussion visit https://groups.google.com/a/kicad.org/d/msgid/devlist/CALBOmsZHZZfVV3zqaprxuoLcO%3DKx85srdYHLc2-HbstCXrpBow%40mail.gmail.com.
