*** From dhcp-server -- To unsubscribe, see the end of this message. ***

I have an HP 5 Si MX that bootp's fine with HP's software
but doesn't work with ISC DHCP server pl27.

Has anyone gotten this to work?

Here is the relevent lines from the config file:

host java.research.bell-labs.com {
        hardware ethernet 0:60:b0:27:c5:e0;
        fixed-address java.research.bell-labs.com;
        option host-name "java.research.bell-labs.com";
        always-reply-rfc1048 on;
        option option-144 "hpnp/zoo-printer.cfg";
        next-server frank.research.bell-labs.com;
        }
(this has been attempted with and without the "always-reply-rfc1048 on;")


Here is a packet dump:

# snoop -vv ether 0:60:b0:27:c5:e0  port 67 port 68
Using device /dev/le (promiscuous mode)
ETHER:  ----- Ether Header -----
ETHER:  
ETHER:  Packet 1 arrived at 18:50:14.52
ETHER:  Packet size = 590 bytes
ETHER:  Destination = ff:ff:ff:ff:ff:ff, (broadcast)
ETHER:  Source      = 0:60:b0:27:c5:e0, 
ETHER:  Ethertype = 0800 (IP)
ETHER:  
IP:   ----- IP Header -----
IP:   
IP:   Version = 4
IP:   Header length = 20 bytes
IP:   Type of service = 0x00
IP:         xxx. .... = 0 (precedence)
IP:         ...0 .... = normal delay
IP:         .... 0... = normal throughput
IP:         .... .0.. = normal reliability
IP:   Total length = 576 bytes
IP:   Identification = 0
IP:   Flags = 0x0
IP:         .0.. .... = may fragment
IP:         ..0. .... = last fragment
IP:   Fragment offset = 0 bytes
IP:   Time to live = 60 seconds/hops
IP:   Protocol = 17 (UDP)
IP:   Header checksum = 7cae
IP:   Source address = 0.0.0.0, OLD-BROADCAST
IP:   Destination address = 255.255.255.255, BROADCAST
IP:   No options
IP:   
UDP:  ----- UDP Header -----
UDP:  
UDP:  Source port = 68
UDP:  Destination port = 67 (BOOTPS)
UDP:  Length = 556 
UDP:  Checksum = 0C5C 
UDP:  
DHCP: ----- Dynamic Host Configuration Protocol -----
DHCP: 
DHCP: Hardware address type (htype) =  1 (Ethernet (10Mb))
DHCP: Hardware address length (hlen) = 6 octets
DHCP: Relay agent hops = 0
DHCP: Transaction ID = 0x57
DHCP: Time since boot = 0 seconds
DHCP: Flags = 0x0000
DHCP: Client address (ciaddr) = 0.0.0.0
DHCP: Your client address (yiaddr) = 0.0.0.0
DHCP: Next server address (siaddr) = 0.0.0.0
DHCP: Relay agent address (giaddr) = 0.0.0.0
DHCP: Client hardware address (chaddr) = 00:60:B0:27:C5:E0
DHCP: 
DHCP: ----- (Options) field options -----
DHCP: 
DHCP: Message type = DHCPDISCOVER
DHCP: Maximum DHCP Message Size = 576 bytes
DHCP: Requested IP Address = 192.0.0.192
DHCP: Requested Options:
DHCP:    1 (Subnet Mask)
DHCP:    3 (Router)
DHCP:    7 (UDP LOG Servers)
DHCP:   44 (NetBIOS RFC 1001/1002 Name Servers)
DHCP:   51 (IP Address Lease Time)
DHCP:   54 (DHCP Server Identifier)
DHCP:   58 (Renewal (T1) Time Value)
DHCP:   59 (Rebinding (T2) Time Value)
DHCP:   12 (Client Hostname)
DHCP:   144 (Ungermann-Bass network debugger)
DHCP:   18 (BOOTP options extensions path)
DHCP: Client Hostname = NPI27C5E0

ETHER:  ----- Ether Header -----
ETHER:  
ETHER:  Packet 2 arrived at 18:50:14.52
ETHER:  Packet size = 389 bytes
ETHER:  Destination = 0:60:b0:27:c5:e0, 
ETHER:  Source      = 8:0:20:7e:31:35, Sun
ETHER:  Ethertype = 0800 (IP)
ETHER:  
IP:   ----- IP Header -----
IP:   
IP:   Version = 4
IP:   Header length = 20 bytes
IP:   Type of service = 0x10
IP:         xxx. .... = 0 (precedence)
IP:         ...1 .... = low delay
IP:         .... 0... = normal throughput
IP:         .... .0.. = normal reliability
IP:   Total length = 375 bytes
IP:   Identification = 0
IP:   Flags = 0x0
IP:         .0.. .... = may fragment
IP:         ..0. .... = last fragment
IP:   Fragment offset = 0 bytes
IP:   Time to live = 16 seconds/hops
IP:   Protocol = 17 (UDP)
IP:   Header checksum = 65bb
IP:   Source address = 135.104.26.26, overture.research.bell-labs.com
IP:   Destination address = 135.104.26.193, java.research.bell-labs.com
IP:   No options
IP:   
UDP:  ----- UDP Header -----
UDP:  
UDP:  Source port = 67
UDP:  Destination port = 68 (BOOTPC)
UDP:  Length = 355 
UDP:  Checksum = F054 
UDP:  
DHCP: ----- Dynamic Host Configuration Protocol -----
DHCP: 
DHCP: Hardware address type (htype) =  1 (Ethernet (10Mb))
DHCP: Hardware address length (hlen) = 6 octets
DHCP: Relay agent hops = 0
DHCP: Transaction ID = 0x57
DHCP: Time since boot = 0 seconds
DHCP: Flags = 0x0000
DHCP: Client address (ciaddr) = 0.0.0.0
DHCP: Your client address (yiaddr) = 135.104.26.193
DHCP: Next server address (siaddr) = 135.104.26.7
DHCP: Relay agent address (giaddr) = 0.0.0.0
DHCP: Client hardware address (chaddr) = 00:60:B0:27:C5:E0
DHCP: 
DHCP: ----- (Options) field options -----
DHCP: 
DHCP: Message type = DHCPOFFER
DHCP: DHCP Server Identifier = 135.104.26.26
DHCP: IP Address Lease Time = 259200 seconds
DHCP: Subnet Mask = 255.255.254.0
DHCP: Router at = 135.104.26.1
DHCP: UDP LOG Servers at = 135.104.26.7
DHCP: NetBIOS RFC 1001/1002 Name Servers at = 135.104.26.122
DHCP: NetBIOS RFC 1001/1002 Name Servers at = 135.104.13.143
DHCP: Renewal (T1) Time Value = 129600 seconds
DHCP: Rebinding (T2) Time Value = 226800 seconds
DHCP: Client Hostname = java.research.bell-labs.com
DHCP: Site Option = 144, length = 20 octets
DHCP:   Value = "hpnp/zoo-printer.cfg"



-- 
    Tom Limoncelli -- [EMAIL PROTECTED] (work) -- [EMAIL PROTECTED] (play)
                         A penny saved is ridiculous.


------------------------------------------------------------------------------
To unsubscribe from this list, please visit http://www.fugue.com/dhcp/lists
If you are without web access, or if you are having trouble with the web page,
please send mail to [EMAIL PROTECTED]   Please try to use the web
page first - it will take a long time for your request to be processed by hand.

Archives for this mailing list are available at 
http://www.webnology.com/list-archives/dhcp/dhcp-server

------------------------------------------------------------------------------

Reply via email to