*** From dhcp-server -- To unsubscribe, see the end of this message. ***
On Wed, 2 Jun 1999, Ted Lemon wrote:
>
> > I don't want the server to generate it. I want the server to respond to
> > it. Unfortunately, the server doesn't recognize option 82(checked via a
> > snoop -v). Thoughts?
>
> Version 3.0 of the DHCP server supports the Relay Agent Information
> option, which you call option 82. Version 2.0 does not. If you are
> using version 3.0,
I am.
> and not getting the behaviour you expect, you
> should give us sufficient information that we can check for ourselves
> to see if the behaviour you are seeing is correct or incorrect, and
> respond accordingly.
I will be happy to(and grateful for any assistance.) I just need to know
what information I can provide to assist you.
Following is the snoop output I grabbed in the hopes of it being helpful:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 1 arrived at 22:48:14.44
ETHER: Packet size = 346 bytes
ETHER: Destination = 8:0:20:a8:60:ae, Sun
ETHER: Source = 0:10:67:0:2b:c2,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 332 bytes
IP: Identification = 16992
IP: Flags = 0x0
IP: .0.. .... = may fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 64 seconds/hops
IP: Protocol = 17 (UDP)
IP: Header checksum = f342
IP: Source address = 209.24.208.234, 209.24.208.234
IP: Destination address = 209.24.208.226, dhcp1
IP: No options
IP:
UDP: ----- UDP Header -----
UDP:
UDP: Source port = 67
UDP: Destination port = 67 (BOOTPS)
UDP: Length = 312
UDP: Checksum = F5A5
UDP:
DHCP: ----- Dynamic Host Configuration Protocol -----
DHCP:
DHCP: Hardware address type (htype) = 1 (Ethernet (10Mb))
DHCP: Hardware address length (hlen) = 6 octets
DHCP: Relay agent hops = 0
DHCP: Transaction ID = 0x350b3b0b
DHCP: Time since boot = 0 seconds
DHCP: Flags = 0x0000
DHCP: Client address (ciaddr) = 0.0.0.0
DHCP: Your client address (yiaddr) = 0.0.0.0
DHCP: Next server address (siaddr) = 0.0.0.0
DHCP: Relay agent address (giaddr) = 209.24.208.129
DHCP: Client hardware address (chaddr) = 00:A0:C9:87:50:D3
DHCP:
DHCP: ----- (Options) field options -----
DHCP:
DHCP: Message type = DHCPDISCOVER
DHCP: Client Identifier = 0x0100A0C98750D3 (unprintable)
DHCP: Client Hostname = Puma
DHCP: Requested Options:
DHCP: 1 (Subnet Mask)
DHCP: 3 (Router)
DHCP: 6 (DNS Servers)
DHCP: 15 (DNS Domain Name)
DHCP: 44 (NetBIOS RFC 1001/1002 Name Servers)
DHCP: 46 (NetBIOS Node Type)
DHCP: 47 (NetBIOS Scope)
DHCP: 57 (Maximum DHCP Message Size)
DHCP: Unrecognized Option = 82, length = 32 octets
DHCP: Value =
0x010420000024021264686370342E302E302E3336406C6F63616C0304F8FFFFFF
(unprintable)
------------------------------------------------------------------------------
To unsubscribe from this list, please visit:
http://www.isc.org/dhcp-lists.html
If you are without web access, or if you are having trouble with the web page,
please send mail to [EMAIL PROTECTED] with the subject line of
'unsubscribe'.
Archives for this mailing list are available at:
http://www.webnology.com/list-archives/dhcp/dhcp-server
------------------------------------------------------------------------------
