How do you set up the mike level? I have tried various approaches and I am not sure it is working. If you set the display for "input level" should that show the mike input? Or is there some other display setting for that?
And then to adjust the mike, which control do you use? The "recording" mike input? But then if you do that with one sound card, would not that mean you do not have a line "recording" which you must need for inputting the audio from the rig to decode the DRM data because you can not run both simultaneously? Or do you control the mike on the output or "playback" side? 73, Rick, KV9U Andrew O'Brien wrote: >To transmit DV, you press TX VOICE in the WinDRM software AND speak in to >the PC's microphone at the same time. > >Andy K3UK > > > Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org Other areas of interest: The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/digitalradio/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
